Bedienungsanleitung Dali Fazon Sat (Seite 5 von 13) (Deutsch, Englisch, Dänisch)

745055

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

UK DE DK

1.0 INTRODUCTION

Congratulations with your new DALI FAZON SAT loudspeaker. It is important to us that your new

loudspeaker is set-up and connected optimally. We strongly recommend that you read this manual

and follow its instructions before unpacking and installing the speaker. This manual contains

instructions for set-up and connection, as well as tips and advice on how to get the most out of

your FAZON SAT loudspeaker.

DALI is acclaimed around the world for unique loudspeakers developed to meet our uncompromising

standards for design and performance. The goal for every single DALI loudspeaker is to create a

listening experience in your home that will make you forget time and place.

Remember to sign up for the DALI newsletter at www.dali-speakers.com.

Enjoy.

2.0 UNPACKING

Be careful not to damage the contents when you unpack the parts. Check that all parts are

contained in the cardboard box (see Table 1). Keep the packaging materials should your speaker

need to be relocated or serviced.

Note:

Take care not to scratch the high-gloss ﬁnish of the DALI FAZON SAT enclosure.

3.0 POSITIONING

Before setting up and connecting your new FAZON SAT loudspeakers, you should ﬁnd the best

possible placement relative to your listening position. It is a good idea to follow these simple

guidelines.

Ideally, the FAZON SAT speakers should be placed at the corners of an equilateral triangle with

the (left and right stereo) speakers at a minimum of 1.5 metres (60”) apart to achieve good

stereo separation. Avoid placing objects between the loudspeakers and the listening position as

obstacles can have a detrimental effect on tonal balance. Placing your new FAZON SAT depends

on the particular kind of set-up you have in mind:

Figure 1 illustrates the optimal LCR set-up

Figure 2 illustrates the optimal Stereo set-up

Figure 3 illustrates the optimal 5.1 Surround set-up

Figure 4 illustrates the optimal 7.1 Surround set-up

4.0 CONNECTION

Before connecting or disconnecting any cables, always turn off the ampliﬁer to avoid electrical

shock or damage to your equipment.

Channel the speaker cable through the groove in the Twist ‘n’ Tilt bracket and be aware to place

the cable under the strain relief (see ﬁgure 5). Use the 2.5 mm Allen key to mount the cables in

the bracket. Ensure the positive terminal on the bracket (marked ‘+’) is connected to the positive

output terminal of the ampliﬁer and negative (marked ‘–’) to the negative (see ﬁgure 6). Incorrect

connection will result in poor stereo imaging and loss of low-frequency output. Always make sure

the terminals are screwed down tight. Always use cables of the same type and length for left and

right channels. We recommend using the White Wave cables from DALI, available from your dealer.

Note:

If you are using FAZON SAT in a surround system, follow the instructions included with your

surround ampliﬁer, as even a single loudspeaker connected out-of-phase will make the bass

weaker and the soundstage unfocused.

Note:

Make sure that the bare conductors are tightly gripped by the terminals with no loose wires that

could cause a short circuit and damage the ampliﬁer.

5.0 MOUNTING

By using the supplied Twist ‘n’ Tilt bracket, the FAZON SAT can be mounted both horizontally and

vertically on either the wall or on the enclosed table stand.

5.1 Wall mounting

Mount the bracket on the wall. Connect the loudspeaker in the wished position (see ﬁgures 7, 8

and 10) to the bracket by using the 2 mm Allen key (see ﬁgure 11). Adjust the speaker to your

preferred position by using the Twist ‘n’ Tilt function (see ﬁgure 13) before tightening the speaker

by turning the button on the back of the speaker (see ﬁgure 12).

5.2 Table stand mounting

Mount the bracket to the table stand (see ﬁgure 9). Connect the loudspeaker to the bracket by

using the 2 mm Allen key (see ﬁgure 11). Adjust the speaker to your preferred position by using

the Twist ‘n’ Tilt function (see ﬁgure 13) before tightening the speaker by turning the button on the

back of the speaker (see ﬁgure 12).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dali Fazon Sat Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info