Bedienungsanleitung Dali LEKTOR (Seite 7 von 26) (Englisch)

562741

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

UK DE DK JPN

7.2 LEKTOR 6/8/SUB

The speakers are designed to stand on the ﬂoor. LEKTOR 6 and 8 can be used with spikes

(Metric M8 thread), or rubber bumpers under the speakers, see Figure 2A/3. Be careful not to

over tighten the locking nuts. Spikes or rubber bumpers can improve the sound quality. You can

try both to hear what gives the best sound quality in your setup. Please be aware, that spikes

may damage the ﬂoor, if it is not protected by e.g. coins under the spikes.

8.0 MAGNETIC SHIELDING

The speaker drive units produce a magnetic ﬁeld which may interfere with CRT televisions/

monitors, hard drives, audio and video tapes as well as swipe cards etc. Therefore keep such

items away from the speakers to avoid damage.

9.0 POSITIONING

To achieve the best results, the loudspeaker setup should be symmetrical round your favorite

listening position (except for LEKTOR SUB), see Figure 4A - C. We recommend that you

experiment with the position of your loudspeakers – the sound quality will change depending

on the loudspeaker position. For LEKTOR 1/2/3/LCR, the speakers should ideally be positioned,

so that the height of the tweeter is approximately at ear height when seated in your favorite

listening position. LEKTOR 6, 8 and SUB are designed as ﬂoor standing speakers. They should

be positioned minimum

10 – 20 cm (4 – 8”) from the rear wall. Ideally LEKTOR 1/2/LCR are designed to be positioned

ﬂat up against the wall. LEKTOR 3 is designed for both stand mounting and on-wall positioning

ﬂat up against the wall.

Objects positioned between the speaker and listening position might negatively affect sound

quality. The speakers are designed to meet our wide dispersion principle, so they should not be

angled towards the listening position, but be positioned parallel with the rear wall, see Figure

4D. By parallel positioning, the distortion in the main listening area will be lowered and the room

integration will be better. The wide dispersion principle will also ensure that sound is spread

evenly within a large area in the listening room.

Every room has its own distinctive acoustics, which inﬂuence the way we experience sound

from a speaker. The sound you hear consists of direct sound from the speakers and reﬂected

sound from the ﬂoor, ceiling and walls. The latter will affect how you experience the sound.

As a basic rule, try to avoid large, hard and reﬂective areas in the immediate vicinity of your

loudspeakers as it will typically cause strong reﬂections, which might disturb the precision and

spatial effect of the sound reproduction. Reﬂection might be suppressed by positioning e.g. a

plant between the speaker and the reﬂecting surface. Soft items such as carpets, curtains etc.

might help if the sound is too bright.

Both the amount and quality of the deep bass depend on the size and shape of the room, and

the position of the speakers. Positioning the speakers near a side or back wall will accentuate

the bass. A corner location will accentuate it even more, but will also increase the reﬂections.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dali LEKTOR Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info