Bedienungsanleitung Dali PHANTOM H Series (Seite 10 von 37) (Deutsch, Englisch, Dänisch, Französisch)

745220

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

UK DE DK CN FR

Remove the template and drill holes for insertion of saw or knife. Saw/cut carefully along the line

marked with pencil.

When the hole for the loudspeaker is made, make sure that the loudspeaker cable is not hanging

loose inside the wall. It must be securely fastened to the inside of the wall to prevent tension on

the cable when the cable is connected with the terminals of the loudspeaker. If left unsupported,

cable can gradually come loose, creating a poor electrical connection between wire and terminals

(see ﬁgure 6 for correct fastening of the cable).

When the loudspeaker cable is fastened and the hole for the loudspeaker is prepared, you are

ready to connect the speaker cables. Connect cable to the terminals - being careful to connect

the ampliﬁer’s red (+) terminal to the loudspeaker’s red (+) terminal and the ampliﬁer’s black (-)

terminal to the loudspeaker’s black (-) terminal. Please refer to chapter 4.3 of this manual.

When the cables are connected, turn on the system and listen to the loudspeakers before ﬁnal

mounting to make sure that all connections are correct. Finally insert the loudspeaker in the wall

opening.

NOTE: Be careful not to touch the drivers during installation. When the loudspeaker is aligned,

tighten the screws in the loudspeaker brackets with a 3mm Allen key/bit so that the speaker is

ﬁrmly mounted in place. Be careful to avoid over-tightening the screws and shredding the threads.

7.0 ruNNINg-IN

You should expect the sound quality from your new speakers to gradually improve during the ﬁrst

period of use. Nothing particular has to be done in order to run in the speakers – but expect up

to 100 hours of playback (depending on playback level) before full performance level is reached.

8.0 MAgNETIC SHIELDINg

The speaker drive units produce a magnetic ﬁeld which may interfere with CRT televisions/

monitors, hard drives, audio and video tapes as well as swipe cards etc. Therefore keep such

items away from the speakers to avoid damage. LCD and plasma televisions/monitors are not

affected by magnetic ﬁelds.

9.0 MAINTENANCE

Cleaning the speaker surfaces can be done with ordinary household cleaning agents. Avoid using

products that are abrasive, or contain acid, alkali or anti-bacterial agents. Avoid using aerosols.

Avoid using cleaning agents directly on the drive units and clean them with extreme care,

particularly the tweeter. The grille may be cleaned using a vacuum cleaner or a normal clothes

brush.

10.0 ENVIrONMENTAL INfOrMATION AND

DISPOSAL

DALI products are designed to meet the international directives concerning Restriction of Hazardous

Substances (RoHS) and disposal of Waste Electrical and Electronic Equipment (WEEE). The waste

symbol indicates that the speakers meet the directives (see ﬁgure 8). The speakers must be

processed or recycled appropriately. Please consult your local waste authority for guidance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dali PHANTOM H Series Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info