Bedienungsanleitung Dali Rubicon C (Seite 8 von 38) (Englisch)

745053

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

1.0 INTRODUCTION

Congratulations with your new DALI RUBICON C loudspeaker. It is important to us that your

new DALI loudspeakers are set up and connected optimally. For this reason, we recommend

that you read this manual and follow its recommendations. The manual contains instructions

for setup and connection, as well as tips and advice on how to get the most out of your new

loudspeakers.

DALI is acclaimed around the world for unique loudspeakers built to our uncompromising

standards for design and performance. The goal for every single DALI loudspeaker is always

our foremost commitment: To create a listening experience in your home that will make you

forget time and place.

Remember to sign up for the DALI newsletter at www.dali-speakers.com.

Enjoy!

2.0 UNPACKING

Be careful not to damage the contents when you unpack the parts. Depending on which DALI

RUBICON C model you have bought, different accessories come with the loudspeaker. Check

that all parts are contained in the cardboard box (see Table 1). Keep the packaging materials

should your speaker need to be relocated or serviced.

3.0 POSITIONING

To achieve the best results, the loudspeaker setup should be symmetrical around your favourite

listening position (see Figure 1). We recommend that you experiment with the position of your

loudspeakers – the sound quality will change depending on the loudspeaker position.

For the DALI RUBICON 2 C the speakers should ideally be positioned, so that the tweeter is

approximately at ear height when seated in your favourite listening position. DALI RUBICON 2 C

should be positioned minimum 20 cm (8”) from the rear wall.

DALI RUBICON 6 C is designed as ﬂoor standing speakers. It should be positioned minimum 20

cm (8”) from the rear wall.

Objects positioned between the speaker and listening position might negatively affect sound

quality. All DALI speakers are designed to meet our wide dispersion principle, so they should not

be angled towards the listening position, but be positioned parallel with the rear wall (see Figure

2). By parallel positioning, the distortion in the main listening area will be lowered and the room

integration will be better. The wide dispersion principle also ensures that sound is spread evenly

within a large area in the listening room.

3.1 DALI RUBICON 6 C

The speakers are designed to stand on the ﬂoor, using spikes or rubber bumpers under the

speakers (see Figure 3A). Mounting spikes or rubber bumpers can improve the sound quality.

We recommend trying both setups in order to deﬁne, what gives the best sound quality in your

setup.

The spikes (included) should be fastened loosely in the two aluminium feet, leaving the spike’s

contra nut only slightly tightened. Mount the feet in the threaded sockets on the bottom of the

speaker using the screws. Make sure to angle the aluminium feet away from the middle of the

speaker bottom, in order to get the best balance area covered. Push the feet against the cabinet

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dali Rubicon C Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info