Bedienungsanleitung Dali Spektor (Seite 8 von 42) (Deutsch, Englisch, Dänisch, Französisch)

745097

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

UK DE DK JP CN FR

3.2 DALI SPEKTOR 6

The speaker are designed to stand on the ﬂoor. SPEKTOR 6 can be used with spikes or rubber

bumpers under the speakers, see Figure 3C/D. Be careful not to over tighten the locking nuts.

Spikes or rubber bumpers can improve the sound quality. You can try both to hear what gives

the best sound quality in your setup. Please be aware, that spikes may damage the ﬂoor, if it is

not protected by e.g. coins under the spikes.

3.3 DALI SPEKTOR VOKAL

SPEKTOR VOKAL is the dedicated centre channel and has been specially designed to be

positioned close to the large surface of the TV screen. You can place it above or below the

screen, on a stand or on a shelf. We recommend ﬁtting the enclosed bumpers to ensure a

stable, vibration-free setup (see Figure 3E).

4.0 CONNECTION

Correct, tight connections to your ampliﬁer are extremely important for your listening experience.

Always use cables of the same type and length for left and right channels. We recommend using

special speaker cables from DALI, available from your dealer.

Connection in correct phase is a detail that is often ignored. The red (+) terminal of the ampliﬁer

must be connected to the red (+) terminal of the loudspeaker. The black (-) terminal of the

ampliﬁer must be connected to the black (-) terminal of the loudspeaker (see ﬁgure 4). Even a

single loudspeaker connected out-of-phase in a stereo or surround installation will make the

bass weaker and the stereo image unfocused.

For the optimal listening experience, the right loudspeaker (as seen from the listening position)

must be connected to the ampliﬁer output terminals marked “R” or “Right”. The left loudspeaker

must be connected to the ampliﬁer output terminals marked “L” or “Left”.

NOTE: Before connecting cables or changing any connections, ALWAYS turn off your ampliﬁer.

NOTE: Make sure that the bare conductors are tightly gripped by the terminals with no loose

wires which could cause a short circuit and damage the ampliﬁer (see Figure 5).

NOTE: If you are using DALI SPEKTOR in a surround system, follow the instructions included

with your surround ampliﬁer.

5.0 RUNNING-IN

Like any mechanical system, a loudspeaker requires a “running-in” period to perform at its

best. You will experience a gradual increase in sound quality during the ﬁrst period of use. The

break-in period will vary depending on use and playback volume. You should expect up to 100

hours of playback until maximum performance is reached. Unlike other mechanical systems,

the life-span of a loudspeaker is increased by normal, regular playback of music.

6.0 CLEANING AND MAINTENANCE

Clean the cabinets with a soft, dry cloth. If the cabinets are dirty, wipe with a soft cloth dipped in

all-purpose cleaner and then well wrung out. Be very careful when wiping the speaker cones,

as they are very fragile. Front grilles can be cleaned with a clothes brush and wiped with a

wellwrung, lint-free cloth and mild all-purpose cleaner.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dali Spektor Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info