Bedienungsanleitung Dali ZENSOR (Seite 6 von 26) (Deutsch, Englisch, Dänisch)

562742

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

1.0 INTRODUCTION

Congratulations with your new DALI ZENSOR loudspeaker. It is important to us that your new

DALI loudspeakers are set up and connected optimally. For this reason, we recommend that you

read this manual and follow its recommendations. The manual contains instructions for setup

and connection, as well as tips and advice on how to get the most out of your new loudspeakers.

DALI is acclaimed around the world for unique loudspeakers built to our uncompromising

standards for design and performance. The goal for every single DALI loudspeaker is always

our foremost commitment: To create a listening experience in your home that will make you

forget time and place.

Remember to sign up for the DALI newsletter at www.dali-speakers.com.

Enjoy!

2.0 UNPACKING

Be careful not to damage the contents when you unpack the parts. Depending on which DALI

ZENSOR model you have bought, different accessories come with the loudspeaker. Check that

all parts are contained in the cardboard box (see Table 1). Keep the packaging materials should

your speaker need to be relocated or serviced.

3.0 POSITIONING

To achieve the best results, the loudspeaker setup should be symmetrical round your favorite

listening position, see Figure 1A - C. We recommend that you experiment with the position of

your loudspeakers – the sound quality will change depending on the loudspeaker position. For

ZENSOR 1, ZENSOR 3 and VOKAL, the speakers should ideally be positioned, so that the height

of the tweeter is approximately at ear height when seated in your favorite listening position.

ZENSOR 5 and 7 are designed as ﬂoor standing speakers. They should be positioned minimum

10 – 20 cm (4 – 8”) from the rear wall. ZENSOR 1, ZENSOR 3 and VOKAL are designed to be

positioned ﬂat up against the wall.

Objects positioned between the speaker and the listening position might negatively affect sound

quality. The speakers are designed to meet our wide dispersion principle, so they should NOT be

angled towards the listening position, but be positioned parallel with the rear wall, see Figure 2.

By parallel positioning, the distortion in the main listening area will be lowered and the room

integration will be improved. The wide dispersion principle will ensure that sound is spread

evenly within a large area in the listening room.

3.1 DALI ZENSOR 1

The speaker can be positioned on a stand/shelf or hung on a wall using the integrated wall

bracket. If positioned on a stand or shelf, the enclosed rubber bumpers can be mounted under

the speaker for stable and vibration free positioning, see Figure 3A. If hung on a wall, mount the

bumpers on the rear edges of the speakers, see Figure 3B. The speakers are hung on a wall

using one screw mounted in the wall. The screw must ﬁt the wall bracket on the rear side of

the speaker, see Figure 3C.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dali ZENSOR Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info