Bedienungsanleitung Danfoss TP9000 (Seite 5 von 104) (Englisch, Spanisch)

465417

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Danfoss Heating

DANFOSS HEATING

What is a programmable room thermostat?

... an explanation for householders

A programmable room thermostat is both a programmer and a room thermostat.

A programmer allows you to set ‘On’ and ‘Oﬀ ’ time periods to suit your own lifestyle.

A room thermostat works by sensing the air temperature, switching on the heating

when the air temperature falls below the thermostat setting, and switching it oﬀ once

this set temperature has been reached.

So, a programmable room thermostat lets you choose what times you want the

heating to be on, and what temperature it should reach while it is on. It will allow you

to select diﬀ erent temperatures in your home at diﬀ erent times of the day (and days

of the week) to meet your particular needs.

Turning a programmable room thermostat to a higher setting will not make the room

heat up any faster. How quickly the room heats up depends on the design of the

heating system, for example, the size of boiler and radiators.

Neither does the setting aﬀ ect how quickly the room cools down. Turning a

programmable room thermostat to a lower setting will result in the room being

controlled at a lower temperature, and saves energy.

The way to set and use your programmable room thermostat is to ﬁ nd the lowest

temperature settings that you are comfortable with at the diﬀ erent times you have

chosen, and then leave it alone to do its job. The best way to do this is to set low

temperatures ﬁ rst, say 18°C, and then turn them up by one degree each day until

you are comfortable with the temperatures. You won’t have to adjust the thermostat

further. Any adjustments above these settings will waste energy and cost you more

money.

If your heating system is a boiler with radiators, there will usually be only one

programmable room thermostat to control the whole house. But you can have

diﬀ erent temperatures in individual rooms by installing thermostatic radiator valves

(TRVs) on individual radiators. If you don’t have TRVs, you should choose a temperature

that is reasonable for the whole ho use. If you do have TRVs, you can choose a slightly

higher setting to make sure that even the coldest room is comfortable, then prevent

any overheating in other rooms by adjusting the TRVs.

The time on the programmer must be correct. Some types have to be adjusted in

spring and autumn at the changes between Greenwich Mean Time and British

Summer Time.

You may be able to temporarily adjust the heating programme, for example, ‘Override’,

‘Advance’ or ‘Boost’. These are explained in the manufacturer’s instructions.

Programmable room thermostats need a free ﬂ ow of air to sense the temperature, so

they must not be covered by curtains or blocked by furniture. Nearby electric ﬁ res,

televisions, wall or table lamps may prevent the thermostat from working properly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Danfoss TP9000 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info