613034
6
Zoom out
Zoom in
Vorherige Seite
1/13
Nächste Seite
4
Description of the device
Features
The ACX-23 is a professional crossover:
• 2x XLR Input and 4x XLR Output
• Clip LED
• Low and High Mute buttons
• Adjustable Input Gain, Crossover Frequency, Low Frequency Phase.
• Adjustable Low and High Frequency Output Level.
Overview
1. Power Switch
Use this button to switch your crossover on.
Note: Pay attention to the special POWER ON / OFF Function, it won’t produce pulse strike to your
amplifier and speakers, when you switch ON / OFF the ACX-23. This practical function can effectively
protect your expensive amplifier and speakers in case of an error operation.
2. "POWER" Indicator
This indicator lights when the crossover is switched on.
3. Mode Indication
This indicator shows the current mode of the ACX-23. Light on, means it is working as 3-way mono;
light off means it is working as 2-way stereo.
4. Output Clip LED
This LED indicates whether the output signal is clipped or not. When the LED flashes once in a while,
indicating the signal is sometimes clipped. When the LED frequently flashes, the signal is clipped often.
You should reduce the input, to the point the LED is not flashing anymore.
5. Low Cut LED
This indicator shows the current Low Cut Filter status. Light on means the low cut filter is at work, light off
means it is not working.
6. Input Level Control
This control allows you to adjust the input level from - to +6dB.
NOTE: Too much adjustment can distort the signal.
7. Decuple Frequency (x10) LED
This LED shows the current crossover ranges. When the button (16) on the rear panel is pressed down,
the LED is on and the adjusting range is from 620 Hz to 8.5 KHz. When the button is pushed out, the
LED is off and its range is from 62 Hz to 850 Hz.
8. Crossover Frequency Control
This knob is to adjust the crossover frequency; its range is limited by the decuple frequency button (16).
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für DAP Audio ACX-23 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info