535584
11
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
Quick Reference Guide 7
Manual EAS Deactivation Push Button
1
Using the programming bar codes contained in the Product Reference Guide (PRG) the
button can be configured to operate always, or only function when the scanner is
enabled.
Productivity Index Reporting Option —Your scanner may be equipped with the optional
Productivity Index Reporting™ feature. This feature allows for data collection on the
readability index of bar codes scanned by the scanner. This data may be transmitted to
the POS Terminal where it may be easily sorted for action by the MIS department to
improve bar code quality at the front end.
For additional information on how to enable Productivity Index Reporting in your scan-
ner, please refer to the Product Reference Guide (PRG).
1. Local store management may elect not to have this manual deactivation feature enabled.
PRESS
DURATION
FUNCTION COMMENT
Momentary
a
Manually initiates EAS deacti-
vation
Center the item with the EAS tag in the scanning area and
push the button.
3 Seconds upon EAS error
Allows scanner to resume
function despite EAS system
failure (non-fatal error)
EAS Failure Mode is indicated
b
by:
- EAS LED blinks ON/OFF red, scanning disabled.
- FRU Status LED Indicator blinks ‘9’
- Error tone is sounded for one second
Upon pressing the button for 3 seconds, the scanner will
sound 3 high-pitched beeps, then resume scan function.
The EAS LED and FRU Status LED will continue blinking
as above, but at a slower rate until EAS system function is
restored.
a. For use in Coupled Mode only
b. If the EAS failure corrects itself, blinking will stop and the EAS LED will turn green.
NOTE
In a case where an item’s bar code is damaged or obscured by an EAS label or
other obstruction, the operator will need to key enter the bar code number.
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Datalogic Magellan 8500Xt wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Datalogic Magellan 8500Xt

Datalogic Magellan 8500Xt Bedienungsanleitung - Englisch - 480 seiten

Datalogic Magellan 8500Xt Bedienungsanleitung - Spanisch - 20 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info