Bedienungsanleitung Datalogic Magellan 9800i (Seite 35 von 452) (Englisch)

535536

Zoom out

Zoom in

Vorherige Seite

1/452

Nächste Seite

Product Reference Guide

Site Preparation Overview

Consider the following factors before installing the scanner/scanning-scale and its optional

Remote Scale Display.

Ventilation Requirements —

The scanner operates without the use of a ventilation fan. As long

as there is adequate convective air flow and no major heat producing equipment in close

proximity, the unit’s housing provides adequate heat dissipation. The air temperature in the

checkstand around the scanner must not exceed 104°F (40°C).

Service Access Requirements —

Routine operations such as ‘zeroing’ and calibration do not

require removal of the scanner from the checkstand or disassembly of the product. The installer

should plan service access for the AC/DC Power Supply and cables.

Recommended Power Installation —

Since the typical grocery environment includes conveyor

belts and electric motors, care should be taken to ensure that the scanner has a supply of “clean”

power (power without excessive electrical noise).

Counter Preparation —

Since the majority of grocery checkout lanes are designed as “left-hand

take away,” the counter drawings in this section focus on this counter design. Simply reverse the

layout for a “right-hand take away” requirement. The unit scans equally well in either of these

two configurations.

Liquid Drainage —

Should a liquid spill occur, ensure that moisture can flow through the

checkstand without pooling.

Leveling —

Plan ahead and provide screws/bolts in the checkstand mounts and a leveling guide

(board) to allow leveling of the scanner or scanning-scale within the counter. Use a 0.375” thick

board to replicate the mounting flange on the long scanner or scanning-scale, and adjust screws

or bolts until the board is flush within the counter. Use a 4.0” wide board stood on its end to

adjust leveling screws/bolts in rail support applications.

Cable Routing —

Placement of the scanning-scale should be planned to allow easy access to

other components as well as optimize communication between the scanner, the POS terminal

and the optional Remote Scale Display. Note that cables may drop straight down from the

scanner’s connector panel, or may be conveniently routed along the unit’s side using the

hardware provided. Do not route interface cables near any electrical motors or other sources of

electromagnetic interference.

Remote Scale Display Placement —

The customer, and checker in some instances, must be able

to easily view and read the Remote Scale Display (if one is present). Ambient light and

mounting height considerations are discussed later in this section.

Vertical Clearance —

Provision must be made to allow adequate space above the scanner bonnet

for removal and replacement of the All Weighs™ Platter (the L-shaped platter). Optimal

clearance permits the platter to be grasped at its top vertical edge and lifted for removal without

obstruction (such as a fixed keyboard mount or any type of enclosure). Should such an

enclosure be unavoidable, an alternate method of platter removal using two coins may be

employed, however a minimum vertical clearance of 1.5” (3.8 cm) MUST be provided

(reference

Figure 10). Another consideration is that the scan zone must be kept free of

obstructions such as enclosures, keyboard mounts, etc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Datalogic Magellan 9800i Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Datalogic Magellan 9800i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info