Bedienungsanleitung Datalogic Magellan 9800i (Seite 40 von 452) (Englisch)

535536

Zoom out

Zoom in

Vorherige Seite

1/452

Nächste Seite

Site Preparation and Installation

Magellan™ 9800i Scanner

Counter Cutout

The most important consideration when planning the counter opening for the scanner is the

operator’s comfortable reaching distance. The ideal, ergonomically sound installation allows

items to be directed within easy reach, and a scanning area requiring no lifting or special

orientation of items. If you haven’t already read the information at the beginning of this section

titled,

Pre-Installation Considerations, please do so before continuing these instructions.

The symmetrical design of the scanner permits the operator to easily pass items from one hand

to the other while scanning (eit

her from right-to-left or left-to-right). With the unique multi-

side scan zone, scanning is accomplished in one fluid motion. The operator simply slides the

item from the conveyor belt or diverter area through the scanning area and passes the item to

the other hand, which in turn bags it or places it on a take-away conveyor belt. Movement

should flow naturally over the surface of the scanner.

Note that the following guidelines for preparing an existing checkstand to accept a sc

anner, or

incorporating the unit into a new checkstand design will not be accurate for all installations.

Although these guidelines will suffice for most standard installations, the installer may need to

make adjustments for varying counter heights and thicknesses, support design, or other

checkstand limitations.

Figure 15 shows a typical “left-hand-take-away” checkstand design.

Follow these basic steps to install the unit:

1. Select a position for the scanner that offers a smooth product flow which best

accom-

modates the reaching distance of the average operator.

2. Cut the opening in the countertop. Select the appropriate drawing from

Figure 17, or

Figure 20 for your model.

3. Install the AC/DC Power Supply, the Remote Scale Display cable and the interface

cable(s) observing

the following:

Interface cables (and display cable, if applicable) should be routed away from all

highly inductive electrical

devices, like motors and conveyor belts, and even away

from the unit’s power cable if possible.

Cables should be easy to remove in the event that replacement is required. A little

planning now will sav

e a lot of frustration later.

4. Connect and verify all system operations.

The scanner should be installed so that leading and trailing edges

of the All Weighs™ Platter are

flush with the countertop to enhance smooth, slide-through scanning (reference

Figure 16).

Keep in mind that the debris chutes on both sides of the platter provide the necessary clearance

for proper scale operation if you are installing a

scanning-scale (you won’t need to provide an

additional gap for that).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Datalogic Magellan 9800i Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Datalogic Magellan 9800i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info