Bedienungsanleitung Datalogic Rhino 10 (Seite 35 von 40) (Englisch)

585987

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Rhino™ 10 User Manual

United States

FCC Class B

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a residential environment. This equipment generates uses and can radiate radio frequency

energy. If not installed and used in accordance with this user's manual, it may cause harmful interference to radio

communications. Note that even when this equipment is installed and used in accordance with this user's manual, there

is still no guarantee that interference will not occur. If this equipment is believed to be causing harmful interference to

radio or television reception, this can be determined by turning the equipment on and off. If interference is occurring,

the user is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna

 Increase the separation between the equipment and the receiver

 Connect the equipment to a power outlet on a circuit different from that to which the receiver is connected

 Consult the dealer or an experienced radio technician for help

In radio systems configured with mobile computers and access points, the frequencies to be used must be allowed by

the spectrum authorities of the specific country in which the installation takes place. Be absolutely sure that the system

frequencies are correctly set to be compliant with the spectrum requirements of the country. The Radio modules used

in this product automatically adapt to the frequencies set by the system and do not require any parameter settings.

This is a Class B product. In a domestic environment this product may cause radio interferences in which case the

user may be required to take adequate measures.

 The User is cautioned that changes or modifications not expressly approved by Datalogic for compliance

could void the User’s authority to operate the equipment.

 The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must

accept any interference, including interference that may cause undesired operation of the device.

Canada

This Cl

ass B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Equipment is certified to the requirements of RSS-210 for 2.4-GHz per IEEE 802.11 (b)(g).

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

Europe

1999/5/EEC R&TTE

Compliant

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Datalogic Rhino 10 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Datalogic Rhino 10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info