6
EN
2/ INSTALLING YOUR APPLIANCE
Warning:
Ensure that your appliance has not suf-
fered any damage during transport (bent
door or seal, etc.). If you notice any kind of
damage, contact your retailer before using
the appliance.
In order to easily locate the make, model
number, etc. of your appliance, we recom-
mend that you note this information on the
“After-Sales Service Department and
Customer Support” page.
Ensure that:
- The electrical installation has sufficient voltage.
- The electrical wires are in good condition.
- The diameter of the wires complies with the
installation requirements.
- Your electrical installation is equipped with
16-ampere thermal-sensitive protection.
If in doubt, consult your electrician.
Electrical connections should be completed
before the appliance is placed in the wall unit.
The appliance must be recess-fitted correctly
to ensure electrical safety. During recess fit-
ting and maintenance operations, the
appliance must be unplugged from the soc-
ket; fuses must be cut off or removed.
The plug must remain accessible after the
appliance is installed.
Your electrical installation should include an
accessible feature that allows users to dis-
connect the power supply.
If the power cable is damaged, it should be
replaced by the manufacturer, its after-sales
serviceor a similarly qualified person so as to
prevent a hazard.
Important:
We cannot accept liability for any acci-
dent or incident resulting from non-existant,
defective or incorrect grounding.
If the oven malfunctions in any way, unplug
the appliance or remove the fuse for the
oven’s connection line.
•BEFORE CONNECTION
•ELECTRICAL CONNECTION
