481724
6
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
EN 2/INSTALLING YOUR APPLIANCE
28
• BEFORE CONNECTING
Warning:
Check that your appliance has not
been damaged during transport (damage
to door or seal, etc.). If you notice any
damage, contact your retailer before using
the appliance.
In order to easily locate the reference
information for your appliance, we
recommend that you note these data on the
«After-Sales Service» page.
• ELECTRICAL CONNECTION
Check that:
- the electrical installation has sufficient vol-
tage.
- the supply cables are in good condition
- the diameter of the wires complies with the
installation requirements.
- your equipment has thermal protection of
at least 15 amp. If in doubt, contact your
electrician.
The electrical connections should be made
before the appliance is installed in its housing.
Electrical safety must be ensured through
proper installation in the housing. During
installation and maintenance operations, the
appliance must be unplugged from the electrical
grid; fuses must be cut off or removed.
The appliance must be connected using a
(standardised) feeder cable with 3 conductors of
1.5 mm
2
(1 live + 1N + ground) which must be
connected to the 220-240 V ~ monophase
network using a CEI 60083-standardised 1 live
+ 1N + ground electrical outlet or one which
complies with installation requirements. The
protection cable (green-yellow) is connected to
the appliance’s
terminal and must be
connected to the appliance’s ground.
If the connection is made with a plug, it must
remain accessible after the appliance has been
installed.
The oven’s neutral (blue cable) must be
connected to the network’s neutral.
Ensure your electrical installation has a system
accessible to the user which can cut off the
appliance from the power grid, with a contact
opening of at least 3mm for all the terminals.
If the supply cable is damaged, it must be
replaced by the manufacturer, its after-sales
service or any other similarly qualified person
to avoid any danger.
Warning:
We cannot be held responsible for
any accident resulting from an inexistent,
defective or incorrect ground lead.
If the oven presents any irregularity, unplug
the appliance or remove the relevant fuse at
the oven’s connection lead-in.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für De Dietrich DME785X wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info