7
2 / INSTALLING YOUR APPLIANCE
EN
The electrical connections are made before the oven
is installed in its housing.
• The fuse for your installation must conform to the
table shown opposite.
• Where the oven is connected using a separate plug
and socket this must be accessible after the oven has
been installed.
• An omnipolar cutout device (with a contacts gap of
at least 3 mm) must be fitted on the supply side of
the connection to meet requirements.
• The oven must be connected using a standard
power cable for which the number of conductors is
dependent upon the type of connection required and
in conformity with the table shown below.
Electrical connections
min.
network voltage connection diameter fuse
of cable
➀ 230V- 50Hz 1 L + N 4 mm² 32 A
➁ 400V 2N-50Hz 2 L + N 1,5 mm² 16 A
④ 230V 2N-50Hz 2 L + N 1,5 mm² 16 A
Warning
We cannot be held responsible for any accident resulting from inexistent, defective or
incorrect earthing.
If the electrical installation in your residence requires any changes in order to hook up your
appliance, contact a professional electrician.
If the oven malfunctions in any way, unplug the appliance or remove the fuse corresponding
to the sector where the oven is hooked up.
7
