19
EN
2 / USING YOUR APPLIANCE
N.B.: No preheating is required when using
the ICS function. Cooking absolutely MUST
start in a cool oven. You should wait for the
oven to cool down completely before
beginning a second cooking programme.
IMPORTANT: Do not open the door during
this phase or you may disturb the recording
of data.
This information gathering phase is identified
by a symbol alongside the cooking
time.
This cooking mode takes place in two phases:
1. An information gathering phase during
which the oven starts heating and determines
the ideal cooking time. This phase lasts
between 5 and 40 minutes depending on the
dish.
2. A second cooking phase: the oven has
calculated the necessary time; the
symbol disappears. The remaining cooking
time indicated takes into account the cooking
time from the first phase. You can now open
the door (e.g. to baste a roast).
- The oven beeps and switches off when the
cooking time is complete and the screen then
indicates that the dish is ready.
DELAYED START FUNCTION:
To program a delayed start,
- Select the cooking end function and
change the cooking end time.
PLEASE NOTE: If you want to programme a
subsequent ICS cooking cycle, wait until the
oven has cooled completely. However, you
can still use the “Expert” function, even if the
oven is hot.
THE “I.C.S.” FUNCTION
•
calculation phase (information gathering)
cooking phase
