66
EN
13/
IF OPERATING ABNORMALITIES OCCUR
You can change the bulb (halogen type G4-
12V-5W) located on the left under the top
cover. To do this:
Important :
Unplug the power cable before chan-
ging the bulb.
• If your machine is fitted with a top tray:
— Remove the top cover by unscrewing the two
screws under the top cover’s lip
(Fig. 15
).
— Remove the top cover by unclipping it from
the back of the appliance and then pushing it
a few centimetres
(Fig. 15
).
— Lift off your dishwasher’s top cover (
Fig. 15
).
• If your machine is flush-mounted beneath
a work surface:
— unscrew the screws at the front of the
machine, under the work surface.
— partially pull out the machine.
Then, in every case:
— Remove the 2 top screws from the protec-
tive plate and remove the plate (
Fig. 15
).
Important:
For safety reasons, do not touch the
two other screws.
— Open the cover by pinching the 2 clips
(
Fig. 15
).
— Remove the bulb/bulb holder assembly
from its housing (
Fig.15
).
Important:
Use a soft cloth to manipulate the bulb.
— Change the bulb by freeing it from its hou-
sing (
Fig.15
).
— To re-install the bulb, follow the above ins-
tructions in reverse order.
FF
EE
DD
CC
BB
BB
AA
Fig. 15
Screw
(depending on the model)
AA
BB
CC
DD
EE
FF
••
CHANGING THE BULB
