Bedienungsanleitung De Dietrich DTG 130-65 Eco.NOx Plus (Seite 4 von 20) (Englisch)

607568

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

DTG130 - 45/65/90/115 Eco.NOx Plus 18/06/2015 - 300005222-02

1.2 Recommendations



For a proper operating of the boiler, follow

carefully the instructions.



Any intervention on the appliance and heating

equipment must be carried out by a qualified

engineer.



The manufacturer is not liable for any improper

use of the appliance or failure to maintain or

install the unit correctly (the user shall take care

to ensure that the system is installed by a

qualified engineer).



Check the seal on the gas and water pipe

connections.



Check that the appliance is properly set for the

type of gas used.



Keep to the polarity shown on the terminals:

phase (L), neutral (N) and earth



Check regularly that the installation contains

water and is pressurised.



Burn hazard in direct contact with the flame

inspection window.

1.3 Ventilation

1.3.1 Chimney versions



Do not obstruct the air inlets in the room (even

partially).

France: the cross section of the aeration vent, which is

compulsory in the boiler room in which the boiler is

installed, must comply with the DTU 61.1 (P 45 204)

standard and, in particular, with the instruction on boiler

room layout (Book 1764 April 1982).

Belgium:the cross-section of the aeration vents, which

are compulsory in the room in which the boiler is installed,

must comply with the NBN D51-003 standard.

Germany: the cross section of the ventiliation vents,

which are compulsory in the room in which the boiler is

installed, must comply with the VDI 2050 form 1 standard

and with other prevailing regulations.

Other countries: the cross section of the aeration inlet,

which is compulsory in the premises in which the boiler is

installed, must comply with the standards in force in the

country.

1.3.2 Forced flue versions

It is not necessary to provide ventilation of the premises

in which the boiler is installed. Ventilation is required if a

mechanical connection to the gas exists.

1.4 Maintenance

- The servicing and cleaning of the boiler and the

sweeping of the flue gas pipe and the bleed pot must be

done at least once a year by a qualified professional.

- Regularly check the level of water in the system and top

up if required, taking care that cold water is not added

suddenly into the boiler when it is hot.

- We recommend taking out a maintenance contract.



Do not drain the installation, except in cases of

absolute necessity. For example: Several

months' absence with the risk of ice in the

building.

1.5 Adapting to another gas type

 Belgium:

The operations required to switch from one gas to another

must be carried out by a SERV'elite technician.

 Other countries:

The operations required to switch from one gas to another

must be carried out by your fitter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

De Dietrich DTG 130-65 Eco.NOx Plus Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von De Dietrich DTG 130-65 Eco.NOx Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info