41
Installing your hob in all simplicity
Changing the type of gas supply (cont'd)
•
Replace these with the injectors
supplied in the wallet, in
accordance with the gas rating
table at the end of the chapter; to
do this:
➪ Screw in the injectors by hand
until they are tight.
➪ Put the spanner well onto the
injector.
➪ With a pencil draw a line on the
hearth plate as indicated (fig. 3).
➪ Turn the spanner clockwise until
the line appears on the other side
(fig. 4). Warning! Do not go
beyond this limit as you are
liable to cause damage.
•
Put all the burners, covers and grills
back in position.
➍
CONNECT lthe electrical cable from
the hob to your single phrase mains
supply (220-240V). Please refer to
the “Electrical connection”
paragraph.
● Changing from natural gas to
butane/propane gas (cont'd).
Spanner
Spanner
Line
Line
Fig. 4
Fig. 3
Y
OUR HOB IS NOW READY TO OPERATE ON BUTANE/PROPANE GAS.
