48
Looking after
sparkers and
injectors
Looking after
your glass top
- If ever the sparkers
get dirty, clean them
with a stiff non-
metallic brush.
-The gas injectors are
in the centre of each
burner in the form of
a "pot". Make sure not
to block them up
partially when
cleaning the hob, as this will considerably
reduce the performance of your gas-rings.
- Small hard-bristled
brush.
- Clean it with hot water, then wipe dry. Use
special ceramic glass cleaning products for
any persistent stains.
- Household sponge
- Special ceramic
glass products
E.g. Cera-Clen
Looking after
your induction
rings
- Clean them with hot water and wipe dry. If
necessary, finish off with the hard side of a
sponge and wipe dry.
- Use special ceramic glass cleaning products
for any persistent stains. (See example).
- Household sponge
- Special ceramic
glass products
E.g. Cera-Clen
Looking after
the grills and
gas burners
- Use a non-abrasive cream for removing any
persistent stains. Then rinse with clean
water. Dry each burner element carefully
before re-lighting your hob.
- Non-abrasive cream.
- Household sponge.
HOW TO PROCEED
ACCESSORIES TO
BE USED
Keeping your hob in good condition is easy if you clean it before it is completely
cold. Even so, never clean it when it is in use. Put all the electric and gas control
knobs at zero.
How to look after your hob?
- Should a crack appear on the glass-top, disconnect your applian-
ce immediately and contact your After-Sales Service.
- It is better to wash the parts of your hob by hand rather than in a dishwasher
-Never use an abrasive sponge (Scotch-brite type) for cleaning your hob.
thermocouple
Nut
Injector
Sparker