61
EN
14/
IF OPERATING ABNORMALITIES OCCUR
••
CHANGING THE BULB
You can change the bulb (halogen type G4-
12V-5W) located on the left under the top
cover. To do this:
Important :
Unplug the power cable before chan-
ging the bulb.
(depending on the model)
— Remove the top cover by unscrewing the
two screws under the top cover’s lip (Fig. 16
).
— Remove the top cover by unclipping it
from the back of the appliance and then pus-
hing it a few centimetres (Fig. 16 ).
— Lift off your dishwasher’s top
cover (Fig. 16 ).
— Remove the 2 top screws
from the protective plate and remove the plate
(Fig. 16 ).
Important :
For safety reasons, do not touch the
two other screws.
— Open the cover by pinching the 2 clips
(Fig. 16 ).
— Remove the bulb/bulb holder
assembly from its housing (Fig.16 ).
Important :
Use a soft cloth to manipulate the bulb.
— Change the bulb by freeing it from its hou-
sing (Fig.16 ).
— To re-install the bulb, follow
the above instructions in reverse order.
F
E
D
C
B
B
A
Fig. 16
Screw
A
B
F
E
D
C
(depending on the model)
