Bedienungsanleitung De Dietrich GT530AE Series (Seite 7 von 84) (Englisch)

609084

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

GT 530ADDR_G30A/AE _IO_V4.0 09/2013

Safety Information and Codes

CAUTION

The operator/ultimate owner is required to have the

heating boiler, burners, and controls checked, as a

minimum once per year, by the original installer or

by a competent heating contractor familiar with the

equipment. Defects must be corrected immediately.

Do not use this boiler if any part has been under water.

Immediately call a qualied heating contractor to inspect

the boiler and to replace any part of the control system

and any gas control which has been under water.

Do not store chemicals containing chlorine or other

corrosive materials near the boiler, such as bleach,

cleaning solvents, detergents, acids, hair spray, spray

cans, paint thinners, paint, or water softener salt.

Important

Do not use the boiler if any section of it has been

subjected to water or submerged in water. Immediately

call your service company to inspect and replace any

part of the control system and gas components which

have been subjected to water or submerged in water.

Boiler modication and spare parts

This boiler uses specic original manufactured parts.

The boiler must not be modied or non-OEM parts used

without the written approval from DDR Americas Inc.

Carbon monoxide

The installation of carbon monoxide detectors is highly

recommended by the U.S. Consumer Product Safety

Commission for buildings with gas burning equipment.

Sources of carbon monoxide include exhaust vents for

gas appliances or wood burning replaces that are not

properly vented, malfunctioning furnaces and exhaust

fumes from idling cars.

Carbon monoxide is a colourless and odourless gas

that is highly toxic. It can interfere with the delivery

of oxygen by the blood to the body. Exposure to low

levels of CO can cause headaches, confusion, nausea,

dizziness, fatigue, and shortness of breath. High level

exposure of CO can cause impaired vision, convulsions,

coma and possibly death.

Have a qualied service technician inspect the heating

equipment exhaust vent pipes and chimney ues on a

yearly basis.

In winter, inspect the exhaust vents for the dryer,

furnace, wood burning or gas stove, replace and heat

recovery ventilator to ensure they are not obstructed

by snow build-up.

Carbon monoxide detectors should be installed and

maintained in buildings that house gas burning

equipment. It is recommended to use a carbon

monoxide detector that is in compliance with a

nationally recognized standard such as ANSI/UL 2034-

2002 or CSA 6.19-01.

Codes

Installation, servicing and maintenance of this product

must be performed by a licenced and trained heating

contractor, experienced in hot water heating boilers as

well as gas and oil combustion. The installation must

conform to all national and local codes having

jurisdiction:

• In Canada, CSA B149.1 Gas Code and CSA B139 Oil

Code.

• In USA, ANSI Z223.1 (NFPA 54) Gas Code, NFPA

31 Oil Code and ASME CSD-1 Automatically Fired

Boilers.

If you have any technical questions or need assistance

with this product, please call your local Sales Represent-

ative or DDR Americas Inc.

Standards applied

We hereby certify that the series of appliances specied

hereinafter are in compliance with the latest standards

described, and that they are manufactured and

marketed in compliance with the requirements of the

following North American standards:

• ASME Section IV

• CSA B51

• ANSI Z21.13-CSA 4.9 - Gas red steam and hot water

boilers.

• CAN/CGA 2.17-M91 - Gas red appliances for use at

high altitude.

• CGA P.2-1991 (R1999) - Testing method for measuring

annual fuel efciencies or residential furnaces and

boilers.

• ANSI/UL 726 - Oil red boiler assemblies.

• CSA B140.7- Oil burning equipment: steam and hot

water boilers.

• CSA B140.0- Oil burning equipment: general

requirements.

• CSA B212- Energy utilization efciencies of oil red

furnaces and boilers.

• CAN/CSA C22.2 No.0-M91 - General requirements -

Canadian electrical codes part II.

• CSA C22.2 No.3-M1988 - Electrical features of fuel

burning equipment.

• UL795 - Commercial and industrial gas heating

equipment.

• CAN1-3.1-M77 - Industrial and commercial gas red

package boilers.

• UL353 - CSA 22.2 No. 24

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

De Dietrich GT530AE Series Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info