Bedienungsanleitung De Dietrich Kaliko - TWH 200E (Seite 55 von 80) (Englisch)

607661

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

6.7.2. List of the parameters

Parameters Description Adjustment range Factory

setting

P 01

DHW setpoint in Auto mode 25 to 70 °C 55 °C

P 02

DHW set point in Eco mode 25 to 65 °C 55 °C

P 04

Choice of mode for the DHW Comfort period:

4 0 = Use the time programs.

4 1 = Use the electricity tariff information input. Tells you whether or not

domestic hot water production is permitted (HP1 = not permitted => Contact

closed, HC0 = permitted => Contact open).

4 2 = Use the electricity tariff information input. Tells you whether or not

domestic hot water production is permitted (HP1 = not permitted => Contact

open, HC0 = permitted => Contact closed).

4 3 = Use the time programs. The status of the electricity tariff information

input is used to activate the Boost function with compressor only (HP1 =

Boost deactivated => Contact closed, HC0 = Boost activated => Contact

open).

4 4 = The status of the electricity tariff information input is used to activate

the Boost function with compressor only (HP1 = Boost activated => Contact

open, HC0 = Boost deactivated => Contact closed).

4 5 = The status of the electricity tariff information input is used to activate

the Boost function with compressor and back-up (HP1 = Boost deactivated

=> Contact closed, HC0 = Boost activated => Contact open).

4 6 = The status of the electricity tariff information input is used to activate

the Boost function with compressor and back-up (HP1 = Boost activated

=> Contact open, HC0 = Boost deactivated => Contact closed).

0 - 6 0

P 06

Automatic switch to summer time (last Sunday in March) and winter time (last

Sunday in October):

4 0 = Function not active (for countries where the time change is done on

other dates or is not in use)

4 1 = Function activated

0 - 1 1

P 07

DHW setpoint in Boost mode 40 to 70 °C 62 °C

P 17

Protection by impressed current anode

4 0 = Deactivation

4 1 = Activation

0 - 1 1

P 18

Water volume contained in the DHW tank (x 10 l) 6 - 255 27

P 19

Water volume for one bath (l) 10 - 255 120

P 20

Maximum duration of the Boost mode (h) 1 - 10 6

P 22

Back-up type

4 0 = None

4 1 = Electrical back-up

4 2 = Hydraulic additional heating

0 - 2 1

P 23

Time delay for starting the electrical or hydraulic back-up in Automatic mode

(Hours)

0 - 10 5

P 24

Compressor start-up time (seconds) 60 - 255 120

P 26

Antilegionella function. The tank is overheated every Saturday from 1 o’clock to

6 o’clock (65 °C).

4 0 = Off

4 1 = Activated outside holiday periods

4 2 = Always activated

0 - 1 0

P 27

Compressor cut-off hysteresis in relation to the set point for the bottom domestic

hot water temperature sensor (only in Auto or Boost mode)

5 - 15 10

TWH 200E TWH 300E TWH 300EH 6. Commissioning

02/06/2015 - 300026515-001-06

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

De Dietrich Kaliko - TWH 200E Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von De Dietrich Kaliko - TWH 200E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info