If you're not sure that your oven is working properly, it doesn't necessarily mean that there's a problem. In all cases,
check the following points:
MMIINNOORR TTRROOUUBBLLEESSHHOOOOTTIINNGGTTSS
14
Leave the oven to cool down and check that all the selector switches are at zero before cleaning it manually
In general don't use any type of scouring powder or metal-backed sponge, or any sharp objects for cleaning.
GGEENNEERRAALL MMAAIINNTTEENNAANNCCEE
WHAT SHOULD YOU DO?
POSSIBLE CAUSES
- Change the bulb.
- Connect to power supply or change fuse.
l The lamp is unusable.
l The oven isn't connected to the power supply or
the fuse has blown.
IF YOU REALIZE THAT
The light inside the oven isn't working.
The oven isn't heating
l The oven isn't connected to the power supply.
l The fuse has blown.
l The temperature selected is too low.
l Other causes.
- Connect to power supply.
- Change the fuse, checking that it is 16A.
- Increase the temperature selected.
- Contact the After-Sales Service.
The cooling fan keeps working after the oven is
turned off.
l The fan should stop after no longer than 1 hour,
as soon as the temperature of the oven falls to
approx. 125°C.
l If it has not stopped after 1 hour
- Nothing.
- Contact the After-Sales Service.
Pyro-cleaning doesn't start
l The door isn't shut properly.
l The clock time on the programmer is flashing.
l Other causes.
- Make sure the door is closed correctly
- Set the hour of the day before starting up the pyro-clean
- Call the After-Sales Service
The door lock during pyro-cleaning isn't
working.
● 1. Cooking temperature too high
● 2. Dirty oven
l 1. Reduce the cooking temperature (see cooking
guide).
l 2. Clean the oven by pyro-cleaning if this
program is available.
The rotisserie spit keeps turning after the end
of cooking
● The rotisserie spit motor keeps working until the
selector is returned to the zero setting.
- Nothing
Smoke is being produced during cooking
l The lock is not effective immediately.
l The door lock only becomes effective approx. 2
minutes after the start of the cycle.
- If it hasn't locked after 5 minutes, contact the
After-Sales Service.
l The lighting is only meant to come on for the
cooking programs.
● The pyro-clean cycle produces temperatures, which are
too high for the lighting to work properly.
There's no light inside the oven while the pyro-clean
program is operating
l The fan in the upper part of the oven (not visible)
is working (even if the oven is set to the "off"
position).
l This is normal; the fan of a pyro-clean oven stays
on until the oven has cooled down.
There's a noise inside the oven after the end of
cooking
In all cases, if you are unable to solve the problem yourself, please contact the After-Sales Service without delay.
