Bedienungsanleitung De Walt D25701K T-1 (Seite 28 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

591286

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

ENGLISH

Wear ear protection.

Wear eye protection.

DATE CODE POSITION (FIG. 1)

The Date Code (r), which also includes the year of

manufacture, is printed into the housing.

Example:

2009 XX XX

Year of Manufacture

Package Contents

The package contains:

1 Rotary hammer

1 Side handle

1 Cloth

1 Kitbox (K-models only)

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g. 1)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

a. On/off switch

b. Lock-on button

c. Electronic speed and impact control dial

d. Service indicator LED

e. Brushwear indicator LED

f. Torque control switch (D25701/D25730)

g. Mode selector switch

h. Tool holder

i. Collar

j. Side handle

k. Side handle clamp wheel

l. Rear side handle position

m. Main handle

INTENDED USE

Your rotary hammer has been designed for

professional hammerdrilling and light chipping,

chiselling and demolition applications.

DO NOT use under wet conditions or in presence of

flammable liquids or gases.

These hammers are professional power tools.

DO NOT let children come into contact with the

tool. Supervision is required when inexperienced

operators use this tool.

Soft Start Feature

The soft start feature allows to build up speed

slowly, thus preventing the drill bit from walking off

the intended hole position when starting. The soft

start feature also reduces the immediate torque

reaction transmitted to the gearing and the operator

if the hammer is started with the drill bit in an

existing hole.

Electronic Speed and Impact Control

(ﬁ g. 2)

The electronic speed and impact control (c) offers

the following advantages:

– use of smaller accessories without risk of

breakage;

– minimised break-out when chiselling or drilling in

soft or brittle materials;

– optimal tool control for precise chiselling.

Torque Limiting Clutch

The torque limiting clutch reduces the maximum

torque reaction transmitted to the operator in case of

jamming of a drill bit. This feature also prevents the

gearing and electric motor from stalling. The torque

limiting clutch has been factory-set and cannot be

adjusted.

Complete Torque Control

D25701, D25730

The clutch torque can be switched between high

and low depending on the application. In normal

operation, the clutch is set in low torque which

has adequate torque for the majority of drilling

applications. If the bit jams in low torque, the clutch

activates much quicker than conventional hammer

clutches. Where low torque is not enough, the tool

can be switched into high torque providing a torque

setting similar to conventional machines. Every time

the tool is plugged in, the clutch will automatically

reset to low torque.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

De Walt D25701K T-1 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von De Walt D25701K T-1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info