Bedienungsanleitung Definitive Technology Mythos 1 (Seite 4 von 6) (Englisch)

582226

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

4 9

them up normally to the ampliﬁer receiver) and connect the subwoofer

to the sub-out with a low-level RCA cable (with Deﬁnitive sub-

woofers this would input into the left or right channel input). You

would then set the woofer’s low-pass crossover. We would suggest

starting around 80 Hz and then experiment up or down from there.

You also have the option with Deﬁnitive subwoofers of using the

subwoofer’s built-in speaker level high-pass crossover as described

in the subwoofer instruction manuals. In this case, also start with the

subwoofer low-pass crossover at about 80 Hz and experiment.

Mythos loudspeakers make excellent rear or side surround speakers.

In order to use the Mythos speakers as rear or side surround speakers,

simply hook them up as normal to the rear or side channel ampliﬁer

outputs of your system. Set the bass management system of your decoder

to “Small”rear and/or side surrounds if your system is using a separate

subwoofer, or “Large”rear or side surrounds if your system is not using

aseparate subwoofer.

Use of Mythos One as Rear or Side

Surround Speakers

“Spiking” Your Loudspeakers

An optional “spiking” kit has been provided should you desire to

“spike” your loudspeakers. “Spiking” your loudspeakers will provide

much greater stability when placing your loudspeakers on carpeting. It

will also, according to many experts, result in an overall improvement in

sonic performance. Care should be taken when using spikes as they may

cause damage to wooden or other ﬂoors which are susceptible to being

scratched. Deﬁnitive Technology is speciﬁcally not responsible for dam-

age which may result from the use of spikes.

The spike kit contains ﬁve spikes. To install, unscrew the non-marking

tips from the centers of the ﬁve leveling feet and screw the ﬁve spikes in

their places. Then, with the help of another person, lift the speaker

upright and lower it to its exact desired position on the ﬂoor. You must

lower the speaker to the exact position you want because once the spikes

are in place you cannot move the speakers sideways on the rug or ﬂoor –

this may damage the ﬂoor or the speakers. Next, adjust the spikes so the

speaker sits solidly on all four spikes (and does not rock).

Positioning Your Mythos Speakers in Your Room

Your new Mythos speakers are very ﬂexible in terms of positioning

and placement options and they will produce excellent sound in almost

any location. Following a few simple guidelines can, however, optimize

their performance for the more critical listener.Please remember that

although the following recommendations are usually valid, all rooms and

listening sets-ups are somewhat unique, so do not be afraid to experiment

with the speakers. Remember, whatever sounds best to you is correct.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Definitive Technology Mythos 1 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info