Bedienungsanleitung Definitive Technology Mythos STS (Seite 9 von 15) (Englisch)

582225

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Using Multi-Channel SACD or DVD-Audio with

your Mythos STS

Because of the nature of their bass management systems, a multi-channel

SACD player or DVD-Audio player (or any other format that requires using

6-channel interconnects) requires the use of an LFE connection between your

receiver or processor and your Mythos STS. If you are using one of these players,

please use the connection method outlined in the “Connecting the Low Frequency

Effects (LFE) Channel” section.

Surround Channel Hook-Up

If you are using the Mythos STS as side/rear surround speakers, hook up the

left surround red (+) terminal of your receiver or ampliﬁer to the red (+) terminal

of your left surround speaker and the left surround black (-) terminal of your

receiver or ampliﬁer to the black(-) terminal of your left surround speaker.

Connect the right surround red (+) terminal of your ampliﬁer or receiver to the

VERY IMPORTANT: Setting Bass Management and

Channel Balance

Dolby Digital and DTS multi-channel systems have critical channel

balance and bass management procedures which must be followed if the

system is to perform properly. We have spoken with many users with system

sound problems which could be clearly traced back to improper system

balance and bass management set-up. Consult your receiver’s or processor’s

manual to learn how to access your system set up menus. If you have

connected the LFE output of your receiver or processor to the LFE input of

the Mythos STS, using the Speaker Set Up (or bass management) menu set

the front left speakers as “Large” and subwoofer as “Yes.” If you have

connected the speakers using only speaker wire, set the front speakers as

“Large” and subwoofer as “No.”

If you have a Deﬁnitive center channel with a built-in powered subwoofer

or other full range center channel, set your receiver’s Speaker Set Up center

channel setting to “Large” (although you should experiment with this to see

what sounds best in your speciﬁc system). For almost every other center

channel speaker set it as “Small.” If you are using large rear surround

speakers with very extended low frequency response such as a large

Deﬁnitive ﬂoor-standing system or one with a built-in powered subwoofer,

set the rear channels of your decoder’s bass management system to “Large.”

If you are using medium to small-sized center and surr

ound speakers, set

them to “Small.”

Use the Speaker Level menu in your receiver or processor to set each

channel in the system to the same volume level. While you can get decent

results doing this by ear, it is best to use an inexpensive Sound Pressure

(SPL) meter to get perfect channel to channel balance. Some new receivers

and processors have Auto Set Up functions that use a supplied microphone

to set levels.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Definitive Technology Mythos STS Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info