Bedienungsanleitung Defort DCC-265-Lt (Seite 5 von 52) (Alle Sprachen)

555771

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

• Disconnect the air hose with the adapter from the

inﬂ ated object.

• Quickly close the air passage of the inﬂ ated object.

ATTENTION! Control air pressure in the inﬂ ated ob-

ject. Avoid excessive pressurization of the inﬂ ated

object.

LAMP 3

Built-in lamp functions in few lighting modes. Press the

lamp diffuser to switch on the lamp and press it few

times more to choose the necessary mode.

NOTE: Some compressors are supplied in optional de-

sign. In this case on the side of the compressor body,

there is an additional socket, similar with the car lighter

socket. Having connected the compressor to the car

lighter, with this additional socket you can connect ad-

ditional devices.

ATTENTION! Do not use the compressor with addi-

tional devices. Power consumption in this case may be

very high. As a result, the adapter or the lighter socket

may be damaged, and a fuse of the car system may get

blown or the accumulator may get discharged.

Troubleshooting guide

1. The compressor is not started on

Blown-out fuse in the car

- Replace the blown-out fuse in the fuse box of the

car.

Poor contact in the lighter socket

- Clean the lighter socket with a non-metal object.

2. The compressor is working poorly

The car accumulator is discharged

- Start the car.

Poor contact in the lighter socket

- Clean the lighter socket with a non-metal object.

Cleaning

Every time after completion of work, it is recommended

to clean the body of the car compressor and its air in-

lets from dirt and dust with a cotton cloth or a napkin.

Persistent impurities must be removed with a cloth

soaked in soapy water.

It is prohibited to use solvents: alcohol, ammonia solu-

tions, etc. for dirt removal. These ﬂ uids adversely affect

plastic parts of the compressor.

To prevent failures

• Keep the compressor adapter clean. With the com-

pressor connected to the car cigarette lighter, in

case of short circuit, a life-threatening situation may

occur. Accumulator capacity is very high, so you can

get injured.

• Protect the compressor from overheating. Do not

cover the compressor with foreign objects while in

use.

Before connecting, please check

• If the adapter and the car lighter socket match;

• If the car accumulator voltage matches with the

compressor's characteristics;

• If the accumulator can provide 10 A;

• Absence of failures and breakdowns in the cable

and the adapter for the cigarette lighter.

OPERATION

First, check pressure in the inﬂ ated object. It can be

done with the manometer, installed in the compressor.

Just connect the hose of the idle compressor to the

inﬂ ated object.

Avoid excessive pressurization.

Do not place the working compressor in the car com-

partment.

Do not leave the working compressor unattended.

Switch off the compressor immediately in the following

cases:

1. If the adapter or power cable is damaged;

2. Smell of burning insulation appears.

ATTENTION! This compressor is intended for short-

time operation (not more than 10 minutes). Longer

operation of the compressor may cause its overheat-

ing and breakdown. If you need to use the compressor

longer, after ﬁ rst 10 minutes switch off the device and

let it cool down for 10 minutes before restart.

WARNING! The valve cover shown on the

2 becomes

very hot during operation. Do not touch this cover to

avoid risk of burns!

Inﬂ ation of car tires

• Place the car to ensure the lowest position of the tire

valve.

• Connect the nipple to the tire valve. Push the lever

down and ﬁ x the nipple.

• Check pressure with the manometer.

• Connect the compressor to the car lighter socket.

• When the required pressure level is reached, dis-

connect the compressor from the car lighter socket.

• Release the lock of the joining nipple and remove it

from the valve.

Inﬂ ation of balls and toys

• Install the valve adapter (connector or needle for ball

inﬂ ation) on the nipple and latch the lock by pushing

the lever down.

• Connect the air hose with the adapter to the inﬂ ated

object.

• Connect the compressor to the car lighter socket.

• Turn the compressor on.

• When the required pressure level is reached, dis-

connect the compressor from the car lighter socket.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Defort DCC-265-Lt Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info