Bedienungsanleitung Defort DCP-150A (Seite 6 von 16) (Deutsch, Englisch, Französisch)

555491

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Important! To prevent damage and the risk of  re,

electrocution or injury, please read and observe

the following safety instructions before using the

polishing machine.

1. Safety instructions

•

• Use the polishing machine only in a clean and

dry environment.

•

• The polishing machine should be placed on the

polishing surface before being switched on or

o .

•

• Keep children away by taking the appropriate

pre cautions.

•

• Avoid switching on the machine inadvertently.

•

• Do not keep your  nger on the switch when

carrying the connected polishing machine from

one place to another.

•

• Always unplug at the mains before changing

the polishing cap or carrying out repairs.

•

• Never carry or pull the machine by its power

cable.

•

• Protect the cable from heat, oil and sharp edges.

•

• Check the cable for breaks before each use.

•

• Do not exert too much pressure when polish-

ing, but simply allow the polishing machine to

glide over the polishing surface.

•

• Check the housing and switch for damage.

•

• Do not use the polishing machine if the housing

or switch is defective.

2. Maintenance and care

•

Wash the polishing cap only by hand and hang up

to dry.

•

When not in use, remove the polishing cap and

store the polishing machine upside down so that

the polishing pad can dry and retains its original

shape.

•

The excessive use of wax and paste can cause the

polishing cap to jump o the polishing pad while

polishing.

•

Use only a mild soap and damp cloth to clean the

polishing cap.

Important! Do not use any abrasive polishing

agents!

3. Care tips

•

For optimum paintwork protection, you should

polish your car 2 to 3 times a year.

•

Wash your car at least every 2 weeks. Avoid us-

ing household detergents as these can damage

the paintwork and remove the layer of wax.

•

Wash your car with a clean sponge, working

from top to bottom.

•

Remove all insects, bird droppings and tar stains

from the paintwork daily.

•

If you use any window-cleaning agents, spray

them onto a cloth and not directly onto the

windows in order to prevent them wetting the

paintwork.

4. Technical data

Power input: 12 V

No-load speed: 3300 min

-1

Disc diameter: 150 mm

Weight: 1,30 kg

5. Instructions for use

When using wax and polishes, please observe the

manufacturers’ instructions.

Pull the textile polishing cap over the polishing

pad. Make sure the polishing cap is completely

clean.

Spread the polishing paste evenly over the pol-

ishing pad. Do not apply the polish directly to the

polishing surface

Switch the polishing machine on and o only

when the polishing machine is resting on the

polishing surface.

Place the extension lead over your shoulder and

work  rst on the large,  at surfaces such as the

bonnet, boot lid and roof, keeping your move-

ments as regular as possible.

Important! Allow the polishing machine to glide

over the polishing surface. Do not exert pressure!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Defort DCP-150A Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info