Bedienungsanleitung Defort DHG-1600 (Seite 5 von 48) (Alle Sprachen)

555554

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

6. MAINTENANCE

Always disconnect the apparatus before carrying

out inspection or cleaning. Never use water or other

liquids to clean the electrical parts of the hot air gun.

• Never use easy inﬂ ammable liquids for cleaning the

hot air gun, especially for the mouthpiece.

• Regular maintenance of your hot air gun prevents

un necessary problems. Keep the ventilation slots of

the hot air gun clean to prevent overheating.

7. TROUBLESHOOTING

In case the hot air gun does not work well, we give you

subjoined some possible causes and their solutions.

1. The engine gets overheated.

The ventilation slots of the hot air gun are dirty.

- Clean the ventilation slots.

2. The hot air gun does not start when it is switched

on.

Interruption in the electrical circuit.

- Check the mains lead and the mains plug. The switch

is defective.

Pull the mains lead out of the wall socket, because

there is a chance of ﬁ re risk! Have the hot air gun

repaired at your local SBM Group dealer.

3. The engine does not work, but it does heat.

Interruption in the electrical circuit.

Pull the mains lead out of the wall socket, because

there is a chance of ﬁ re risk! Have the hot air gun

repaired at your local SBM Group dealer.

2. INSTALLATION

You can work manually with this hot air gun or you can

put it in a vertical position. If you use the vertical posi-

tion the metal suspension bracket of the handgrip must

also stand vertical for supporting the handgrip on the

correct place.

3. USING THE APPLIANCE

THE HOT AIR GUN CAN BE USED FOR:

• plumbing work like tube connections, solder, bow-

ing tubes;

• removing paint, varnish and lacquer without ﬁ re-

risk;

• quickly drying of appliances which have become

wet;

• drying surfaces for quick repairing;

• removing self-adhesive labels in a clean way;

• placing PVC labels;

• blistering after sticking PVC materials can be

smoothed after heating;

• easy removing of vinyl carpeting;

• forming all synthetics with a low temperature

among which polyethylene and PVC;

• forming all synthetics with a high temperature

among which acryl and plexiglass;

• smelting synthetics, among which matters and foils

with PVC layer;

• applying heat shrinking tubes;

• shrink wrappers;

• thawing tubes and engines;

• repairing ﬁ nishing layers: email of bath and house-

hold appliances;

• applying epoxy powder cover layers;

• repairing of ski’s, surf-boards and other sports

goods;

• unscrewing too fast ﬁ xed screws and connections.

4. BEFORE OPERATING

Before you switch on the hot air gun you have to search

for the right adapter for the mouthpiece and assemble it

on the mouthpiece if it is still cold.

IMPORTANT: Replace the mouthpiece only:

• with a stationary engine;

• when the appliance is disconnected;

• when the mouthpiece is cold.

5. OPERATION

• Check if the mains switch is on position “0” before

you connect the apparatus;

• Keep the power voltage always away from the hot

air stream and the mouthpiece.

Tip: If you want to get the best result, test all appli-

ances on a little part of the workpiece.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Defort DHG-1600 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info