Bedienungsanleitung Defort DJS-625N (Seite 5 von 40) (Alle Sprachen)

555496

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Jig saw

INTENDED USE

This tool is intended for making cut-throughs and cut-

outs in wood, plastic, metal, ceramic plates and rubber,

and is suitable for straight and curved cuts at 0° or 45°.

TECHNICAL SPECIFICATIONS

PRODUCT ELEMENTS 2

1. Switch for on/off

2. Button for switch locking

3. Wheel for adjusting sawing speed

4. Lever for selecting sawing mode

SAFETY

WARNING! Read all instructions. Failure to follow all

instructions listed below may result in electric shock,

ﬁ re and/or serious injury.

 Always keep the cord away from moving parts of

the tool

 If the cord is damaged or cut through while working,

do not touch the cord, but immediately disconnect the

plug

 Never use tool when cord is damaged; have it

replaced by a qualiﬁ ed person

 Do not cut material containing asbestos

 Do not use a saw blade which is cracked, deformed

or dull

 Keep hands away from the saw blade while the tool

is in use

 Remove all obstacles on top of as well as under-

neath the cutting path before you start cutting

 Always disconnect plug from power source before

making any adjustment or changing any accessory

● Wear a dust protection mask when working with

materials which produce dust that is detrimental

to health; inform yourself beforehand about the

materials to be worked on

 Wear protective goggles when working with materi-

als which produce chips

 Avoid damage that can be caused by screws, nails

and other elements in your workpiece; remove them

before you start cutting

 Check the functioning of the tool before each use

and, in case of a defect, have it repaired immediately

by a qualiﬁ ed person; never open the tool yourself

 Always check that the supply voltage is the same

as the voltage indicated on the nameplate of the tool

(tools with a rating of 230V or 240V can also be con-

nected to a 220V supply)

 When used outdoors, connect the tool via a fault

current (FI) circuit breaker with a triggering current

of 30 mA maximum, and only use an extension cord

which is intended for outdoor use and equipped with a

splash-proof coupling-socket

 The noise level when working can exceed 85

dB(A); wear ear protection

 When you put away the tool, switch off the motor

and ensure that all moving parts have come to a com-

plete standstill

 SBM Group can assure ﬂ awless functioning of the

tool only when original accessories are used

 Use completely unrolled and safe extension cords

with a capacity of 16Amps (U.K. 13 Amps)

 In case of electrical or mechanical malfunction, im-

mediately switch off the tool and disconnect the plug

 This tool should not be used by people under the

age of 16 years

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

 Do not connect the blue (= neutral) or brown (= live)

wire in the cord of this tool to the earth terminal of the

plug

 If for any reason the old plug is cut off the cord of

this tool, it must be disposed of safely and not left unat-

tended

Your machine is double insulated in ac-

cordance with EN 50144; therefore no

earthwire is required.

MAINTENANCE

Make sure that the machine is not live when

carrying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots

free from dust and dirt.If the dirt does not come off use

a soft cloth moistened with soapy water. Never use

solvents such as petrol, alcohol, ammonia water, etc.

These solvents may damage the plastic parts.

Lubricate the saw blade guide regularly.

Should a fault occur, e.g. after wear of a part, please

contact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most of

the packaging materials can be recycled. Take these

materials to the appropriate recycling locations. Take

your unwanted machines to your local SBM Group

dealer. Here they will be disposed of in an environmen-

tally safe way.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Defort DJS-625N Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info