Bedienungsanleitung Defort DPC-2220 (Seite 12 von 72) (Deutsch, Englisch, Französisch)

555844

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Petrol chainsaw

GENERAL SAFETY PRECAUTIONS

Before using a new chain saw please read this manual

carefully.

WARNING! Under no circumstances may the

design of the machine be modiﬁ ed without

the permission of the manufacturer. Always

use genuine accessories. Non-authorized modiﬁ ca-

tions and/or accessories can result in serious personal

injury or the death of the operator or others.

WARNING! A chain saw is a dangerous tool if

used carelessly or incorrectly and can cause

serious, even fatal injuries. It is very impor-

tant that you read and understand the contents of this

operator’s manual.

WARNING! Running an engine in a conﬁ ned

or badly ventilated area can result in death

due to asphyxiation or carbon monoxide poi-

soning.

PERSONAL PROTECTIVE EQUIPMENT

• Approved protective helmet

• Hearing protection

• Protective goggles or a visor

• Gloves with saw protection

• Trousers with saw protection

• Boots with saw protection, steel toe-cap and non-

slip sole

Generally clothes should be close-ﬁ tting without re-

stricting your freedom of movement.

MACHINE'S SAFETY EQUIPMENT

The life span of the machine can be reduced and the

risk of accidents can increase if machine maintenance

is not carried out correctly and if service and/or repairs

are not carried out professionally. If you need further

information please contact your nearest service work-

shop.

WARNING! Never use a machine with defec-

tive safety components. Safety equipment

must be inspected and

maintained. See instructions under the heading Check-

ing, maintaining and servicing chain saw safety equip-

ment. If your machine does not pass all the checks,

take the saw to a servicing dealer for repair.

CHAIN BRAKE AND FRONT HAND GUARD

Your chain saw is equipped with a chain brake that is

designed to stop the chain if you get a kickback. The

chain brake reduces the risk of accidents, but only you

can prevent them.

Take care when using your saw and make sure the

kickback zone of the bar never touches any object.

• The chain brake can either be activated manually

(by your left hand) or automatically by the inertia re-

lease mechanism.

• The brake is applied when the front hand guard is

pushed forwards.

• This movement activates a spring-loaded mecha-

nism that tightens the brake band around the engine

drive system (clutch drum).

• The front hand guard is not designed solely to ac-

tivate the chain brake. Another important feature is

that it reduces the risk of your left hand hitting the

chain if you lose grip of the front handle.

• The chain brake must be engaged when the chain

saw is started to prevent the saw chain from rotat-

ing.

• Use the chain brake as a ”parking brake” when

starting and when moving over short distances, to

reduce the risk of moving chain accidentally hitting

your leg or anyone or anything close by.

• To release the chain brake pull the front hand guard

backwards, towards the front handle.

• Kickback can be very sudden and violent. Most

kickbacks are minor and do not always activate the

chain brake. If this happens you should hold the

chain saw ﬁ rmly and not let go.

• The way the chain brake is activated, either manu-

ally or automatically by the inertia release mecha-

nism, depends on the force of the kickback and the

position of the chain saw in relation to the object that

the kickback zone of the bar strikes.

If you get a violent kickback while the kickback zone

of the bar is farthest away from you the chain brake is

designed to be activated by the inertia in the kickback

direction.

VIBRATION DAMPING SYSTEM

Your machine is equipped with a vibration damping

system that is designed to minimize vibration and make

operation easier.

The machine′s vibration damping system reduces the

transfer of vibration between the engine unit/cutting

equipment and the machine′s handle unit. The body of

the chain saw, including the cutting equipment, is insu-

lated from the handles by vibration damping units.

Cutting hardwoods (most broadleaf trees) creates

more vibration than cutting softwoods (most conifers).

Cutting with cutting equipment that is blunt or faulty

(wrong type or badly sharpened) will increase the vi-

bration level.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Defort DPC-2220 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info