Bedienungsanleitung Defort DPC-2220 (Seite 17 von 72) (Deutsch, Englisch, Französisch)

555844

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Basic safety rules

Look around you:

• To ensure that people, animals or other things can-

not affect your control of the machine.

• To make sure that none of the above might come

within reach of your saw or be injured by falling

trees.

CAUTION! Follow the instructions above, but

do not use a chain saw in a situation where you

cannot call for help in case of an accident.

Do not use the machine in bad weather, such as dense

fog, heavy rain, strong wind, intense cold, etc.

Working

in bad weather is tiring and often brings added risks,

such as icy ground, unpredictable felling direction, etc.

3 Take great care when removing small branches and

avoid cutting bushes (i.e. cutting many small branches

at the same time). Small branches can be grabbed by

the chain and thrown back at you, causing serious in-

jury.

4 Take great care when cutting a tree that is in ten-

sion. A tree that is in tension may spring back to its

normal position before or after being cut. If you posi-

tion yourself incorrectly or make the cut in the wrong

place the tree may hit you or the machine and cause

you to lose control. Both situations can cause serious

personal injury.

5 Before moving your chain saw switch off the engine

and lock the chain using the chain brake. Carry the

chain saw with the bar and chain pointing backwards.

Fit a guard to the bar before transporting the chain saw

or carrying it for any distance.

6 When you put the chain saw on the ground, lock the

saw chain using the chain brake and ensure you have

a constant view of the machine. Switch the engine off

before leaving your chain saw for any length of time.

WARNING! Sometimes chips get stuck in the

clutch cover causing the chain to jam. Always

stop the engine before cleaning.

GENERAL RULES

1 If you understand what kickback is and how it hap-

pens then you can reduce or eliminate the element of

surprise. By being prepared you reduce the risk.

Kickback is usually quite mild, but it can sometimes be

very sudden and violent.

2 Always hold the chain saw ﬁ rmly with your right hand

on the rear handle and your left hand on the front han-

dle. Wrap your ﬁ ngers and thumbs around the handles.

You should use this grip whether you are right-handed

or left-handed. This grip minimises the effect of kick-

back and lets you keep the chain saw under control. Do

not let go of the handles!

3 Most kickback accidents happen during limbing.

Make sure you are standing ﬁ rmly and that there is

nothing in the way that might make you trip or lose your

balance.

Warm engine

Use the same procedure as for starting a cold engine

but without setting the choke control in the choke posi-

tion. Set the throttle to the start position by pulling out

the blue choke control to the choke position and then

pushing it in again.

WARNING! Long term inhalation of the en-

gine’s exhaust fumes, chain oil mist and dust

from sawdust can represent a health risk.

• Never start a chain saw unless the bar, chain and

all covers are ﬁ tted correctly. See instructions under

the heading Assembly. Without a bar and chain at-

tached to the chain saw the clutch can come loose

and cause serious injury.

• The chain brake should be activated when starting.

See instructions under the heading Start and stop.

Do not drop start. This method is very dangerous

because you may lose control of the saw.

• Never start the machine indoors. Exhaust fumes can

be dangerous if inhaled.

• Observe your surroundings and make sure that

there is no risk of people or animals coming into

contact with the cutting equipment.

• Always hold the saw with both hands. The right hand

should be on the rear handle, and the left hand on

the front handle. All people, whether right or left

handed, should use this grip. Use a ﬁ rm grip with

thumbs and ﬁ ngers encircling the chain saw han-

dles.

Stopping

Stop the engine by pressing down the stop button.

WORKING TECHNIQUES

BEFORE USE:

1 Check that the chain brake works correctly and is

not damaged.

2 Check that the rear right hand guard is not dam-

aged.

3 Check that the throttle lockout works correctly and

is not damaged.

4 Check that the stop switch works correctly and is

not damaged.

5 Check that all handles are free from oil.

6 Check that the anti vibration system works and is

not damaged.

7 Check that the mufﬂ er is securely attached and not

damaged.

8 Check that all parts of the chain saw are tightened

correctly and that they are not damaged or miss-

ing.

9 Check that the chain catcher is in place and not

damaged.

10 Check the chain tension.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Defort DPC-2220 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info