Bedienungsanleitung Defort DRH-620N-K (Seite 6 von 44) (Alle Sprachen)

555338

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Rotary hammer

INTENDED USE

●

This tool is intended for hammer drilling in concrete, brick

and stone; for drilling in wood, metal and plastic as well as

for screwdriving (speciﬁc accessories should be used)

●

The hammering system in this tool outperforms any tradi-

tional ratcheting drill when drilling in concrete

●

This tool is designed for use in combination with all stand-

ard SDS+ accessories

TECHNICAL SPECIFICATIONS 1

PRODUCT ELEMENTS 2

1 On/Off switch

2 Switch locking button

3 Switch for selecting operating mode

4 Locking sleeve

5 Auxiliary handle

SAFETY

WARNING! Read all instructions. Failure to follow all in-

structions listed below may result in electric shock, ﬁre

and/or serious injury.

● Wear ear protectors with hammer drills (exposure to

noise can cause hearing loss)

● Use auxiliary handles supplied with the tool (loss of con-

trol can cause personal injury)

● Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

● Always keep the cord away from moving parts of the

tool

● When you put away the tool, switch off the motor and

ensure that all moving parts have come to a complete

standstill

● Use completely unrolled and safe extension cords with

a capacity of 16 Amps (UK 13 Amps)

● In case of electrical or mechanical malfunction, immedi-

ately switch off the tool and disconnect the plug

● SBM Group can assure ﬂawless functioning of the tool

only when original accessories are used

● Use only accessories with an allowable speed matching

at least the highest no-load speed of the tool

● This tool should not be used by people under the age

of 16 years

● Be careful not to drill or drive into areas where electrical

wires may be contacted

● If the cord is damaged or cut through while working, do

not touch the cord, but immediately disconnect the plug

● Never use tool when cord is damaged; have it replaced

by a qualiﬁed person

● Always check that the supply voltage is the same as

the voltage indicated on the nameplate of the tool (tools

with a rating of 230V or 240V can also be connected to a

220V supply)

● If the drill bit becomes unexpectedly jammed (causing

a sudden, dangerous reaction), immediately switch off the

tool

● Be aware of the forces that occur as a result of jamming

(especially when drilling metals); always hold the tool

ﬁrmly with both hands and take a secure stance

● Always disconnect plug from power source before mak-

ing any adjustment or changing any accessory

● Holding the tool

- keep the ventilation slots uncovered

- do not apply too much pressure on the tool; let the tool

do the work for you

Your machine is double insulated in accord-

ance with EN 50144; therefore no earthwire

is required

MAINTENANCE

Make sure that the machine is not live when

carrying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots free

from dust and dirt.If the dirt does not come off use a soft

cloth moistened with soapy water. Never use solvents

such as petrol, alcohol, ammonia water, etc. These sol-

vents may damage the plastic parts.

Every six months it is recommended to take your machine

to Service Center to change the grease.

Should a fault occur, e.g. after wear of a part, please con-

tact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most of the

packaging materials can be recycled. Take these materi-

als to the appropriate recycling locations. Take your un-

wanted machines to your local SBM Group dealer. Here

they will be disposed of in an environmentally safe way.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Defort DRH-620N-K Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info