Bedienungsanleitung Defort DS-36N-Lilt (Seite 5 von 40) (Alle Sprachen)

555736

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

● Do not use charger when damaged; take it to one of

the officially registered SBM Group Service Stations

for a safety check

● Do not use battery when damaged; it should be re-

placed immediately

● Do not disassemble charger or battery

● Do not attempt to recharge non-rechargeable bat-

teries with the charger WHEN CONNECTING NEW

3-PIN PLUG (U.K. ONLY):

● Do not connect the blue (= neutral) or brown (= live)

wire in the cord of the charger to the earth terminal

of the plug

● If for any reason the old plug is cut off the cord of the

charger, it must be disposed of safely and not left

unattended

To ensure longer service life and proper

performance of the battery, take the following

actions when you start using new battery:

1. Use the new battery, without recharging it, till its

complete discharge.

2. Then charge the battery for 5-7 hours.

3. Repeat abovementioned actions (1 and 2) 3-5

times to reach the nominal battery capacity.

MAINTENANCE

Make sure that the machine is not live when

carrying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots

free from dust and dirt.If the dirt does not come off use

a soft cloth moistened with soapy water. Never use

solvents such as petrol, alcohol, ammonia water, etc.

These solvents may damage the plastic parts.

The machine requires no additional lubrication.

Should a fault occur, e.g. after wear of a part, please

contact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most

of the packaging materials can be recycled. Take

these materials to the appropriate recycling locations.

Take your unwanted machines to your local SBM

Group dealer. Here they will be disposed of in an

environmentally safe way.

Li-Ion batteries can be recycled. Deliver them to a

disposal site for chemical waste so that they can be

recycled or disposed of in an environmentally friendly

manner.

Cordless screwdriver

TECHNICAL SPECIFICATIONS 1

PRODUCT ELEMENTS 2

1. On/off switch

2. Ring for torque control

3. Switch for changing direction of rotation

SAFETY

WARNING! Read all instructions. Failure to follow all

instructions listed below may result in electric shock,

ﬁ re and/or serious injury.

● Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used

with another battery pack.

● Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

● Avoid damage that can be caused by screws, nails

and other elements in your workpiece; remove them

before you start working

● Always check that the supply voltage is the same

as the voltage indicated on the nameplate of the

charger (chargers with a rating of 230V or 240V can

also be connected to a 220V supply)

● In case of electrical or mechanical malfunction, im-

mediately switch off the tool or unplug charger from

power source

● SBM Group can assure flawless functioning of the

tool only when original accessories are used

● Use only accessories with an allowable speed

matching at least the highest no-load speed of the

tool

● This tool should not be used by people under the

age of 16 years

● Be careful not to drill or drive into areas where elec-

trical wires may be contacted

● Do not touch the contacts in the charger

● Do not expose tool/charger/battery to rain

● Never charge battery outdoors

● Store tool/charger/battery in locations where tem-

perature will not exceed 40°C or drop below 0°C

● Batteries will explode in fire, so do not burn battery

for any reason

● When damaged, and under extreme usage and tem-

perature conditions, batteries may start to leak

- if liquid comes into contact with the skin, wash

quickly with soap and water, then with lemon juice

or vinegar

- if liquid gets into the eyes, flush eyes with clean wa-

ter for a minimum of 10 minutes and seek immedi-

ately medical attention

● When battery is not in tool or charger, it should be

kept away from metal objects such as nails, screws,

keys etc. to prevent short-circuit

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Defort DS-36N-Lilt Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info