Bedienungsanleitung Defort DVP-250N-10 (Seite 5 von 40) (Alle Sprachen)

555823

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Submersible pump

for clean water

SAFETY AND OPERATING INSTRUCTIONS

For your own safety and for the safety of others, please

read these instructions carefully before using this appli-

ance. Keep in a safe place for future reference.

Warning! Always read the instruction for electrical

products care fully before use.

It will help you understand your product more easily

and avoid unnecessary risks.

Keep this instruction manual in a safe place for future

use.

TECHNICAL SPECIFICATIONS 1

FEATURES 2

1. Main motor housing

2. Universal connector

3. Power cable

SAFETY INSTRUCTIONS

• This pump is not to be used to pump drinking water.

• This pump is not to be used to pump combustible,

gaseous or explosive ﬂ uids.

• Dispose of plastic bags safely - they are a suffocation

hazard for young children.

• Please read these instructions carefully and tho-

roughly before using this appliance and keep them for

future reference. It is very important that you under-

stand how to use this appliance safely so please take

the time to familiarize yourself with the requirements

as outlined in these instructions.

• If you are in any doubt what so ever about using this

appliance, we strongly recommend that you employ

the services of a suitably qualiﬁ ed person.

• Electrical connection must be protected by a residual

current device (RCD) at the power socket with a

nominal trip current of 30mA (max).

• Keep children and pets well away from the work area

and never allow children to use this appliance or

touch the extension cord at any time. When not in

use, keep this appliance stored in a safe place out of

reach of children.

• Never leave the appliance unattended when in use.

• Never pull the appliance by its power cord. Carry it

using the carry handle.

• Do not allow the power cord to lay on or across

sharp objects that might pierce the outer insulation.

Carry out a visual inspection of the power cord be-

fore use and if it is damaged, have it replaced by a

specialist service centre. Do not use the appliance if

the cord is damaged.

• Keep the power cord away from heat, frost, oil, sol-

vents or any sharp objects or edges.

• Electrical connections e.g. extension cable, must be

protected from moisture at all times.

• Check that the power rating on your appliance cor-

responds with the power rating at you mains supply.

The supply voltage must be 230-240 V.

• Never run this appliance dry-out of the water.

• Always have the appliance switched off and the plug

removed from the power socket before placing it in

or removing it from the water. Only switch the power

back on with dry hands.

• Never use this appliance in a pond or swimming pool

while people are present-in the water!

Electrical Information (only for the UK)

The wires of this appliance are coloured in accordance

with the following code:

Brown: Live (L) or Red

Blue: Neutral (N) or Black

Green and Yellow or Green: Earth (E) (symbol here).

• This appliance must be earthed

• 3 pin plugs must comply to BS / 3 63

• Fuse must be 5 amp and comply to BSI362

If the plug needs replacing, the new plug must be wired

in accordance with the following instructions:

Connect the Blue wire to the terminal marked NEU-

TRAL (N). Connect the Brown wire to the terminal mar-

ked LIVE (L). Connect the Green and Yellow wire to the

terminal marked EARTH (E) (symbol here).

IF IN DOUBT CONSULT

A QUALIFIED ELECTRICIAN!

All electrical connections e.g. extension cable, must

be of an approved waterproof type for outdoor use.

Exten sion cables must be three-core, one of which is

EARTH.

Always fully unwind extension cables before use.

Connection to the mains power supply must be via an

approved residual current device (RCD), with a residu-

al operating current not exceeding 30mA.

MAINTENANCE

There are no user serviceable parts in this appliance.

Always ﬂ ush through with clean water after every use.

GENERAL USE

• This pump is NOT designed for continuous opera-

tion e.g. as a swimming pool or pond circulation

pump.

• If used as an intermittent pump to circulate water in

an ornamental pond it must be sited in a sump or

behind a suitable barrier to stop pond life being suc-

ked into it.

• Ensure there are no obstructions around the inlet

openings around the base of the pump. The inlet ope-

nings must be clear of mud or sludge at the bottom of

a pool.

• If the pump is used to drain a swimming pool it must

only be used when the pool is completely empty of

people.

• After use allow the pump to run using clean water for

2-3 minutes in order to remove residues and parti-

cles that may have accumulated in the pump and

out let hose.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Defort DVP-250N-10 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info