Bedienungsanleitung Defort DWI200S (Seite 6 von 88) (Alle Sprachen)

555801

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

INVERTER WELDING MACHINE

1. LAYOUT

1. Electrode holder

2. Earth terminal

3. Adjustment wheel for welding current

4. Selector switch

5. Control lamp for overheating

6. Carry handle

7. Power cable

2. ITEMS SUPPLIED

Welding set

Welding area equipment

3. IMPORTANT INFORMATION

Please read the directions for use carefully and ob-

serve the information provided. It is important to con-

sult these instructions in order to acquaint yourself with

the machine, its proper use and safety precautions.

SAFETY INFORMATION

Please note

IMPORTANT

Only use this appliance for the purpose for which it is

designed and as described in these instructions: Man-

ual arc welding with coated electrodes.

Handling this system incorrectly may be hazardous for

persons, animals and property. The user of this system

is responsible for his/her own safety and for the safety

of others.

Read these operating instructions and follow all the

regulations.

• Repairs and/or maintenance work may only be car-

ried out by qualiﬁ ed personnel.

• Use only the welding cables supplied.

• Ensure that the appliance is looked after properly.

• To ensure that sufﬁ cient air can be drawn in through

the ventilation slits, the appliance should not be con-

stricted or placed next to a wall while it is operating.

Make sure that the appliance is correctly connected

to the mains supply (see 6.). Do not subject the

mains lead to any tensile stress. Unplug the appli-

ance before you change its position.

• Check the condition of the welding cables, the elec-

trode tongs and the earth terminals; wear on the

insulation and the live parts may result in danger-

ous conditions and reduce the quality of the welding

work.

• Arc welding generates sparks, molten metal parti-

cles and smoke, so the following is required: Re-

move all inﬂ ammable substances and/or materials

from the working area.

• Ensure that there is adequate ventilation.

• Do not weld on tanks, vessels or pipes that have

contained inﬂ ammable liquids or gases. Avoid all

direct contact with the welding circuit; the idling volt-

age between the electrode tongs and the earth ter-

minal may be dangerous.

• Do not weld in dusty places.

• Do not store or use the appliance in wet or damp

conditions or in the rain.

• Protect your eyes with specially designed goggles

(DIN level 9-10), which you can attach to the sup-

plied safety shield. Wear gloves and dry safety cloth-

ing that are not contaminated by any oil or grease to

ensure that your skin is not exposed to ultraviolet

radiation from the arc.

REMEMBER.

• The radiation from the arc can damage your eyes

and cause burns on skin.

• Arc welding generates sparks and droplets of molten

metal; the welded workpiece may start to glow and will

remain very hot for a relatively long period of time.

• Arc welding releases vapors that may be harmful.

Every electric shock is potentially fatal.

• Do not approach the arc within a radius of 15 m un-

protected.

• Protect yourself (and others around you) against the

possible hazardous effects of the arc.

• Warning: Depending on the mains connection con-

ditions at the connection point of the welding set,

other consumers connected to the mains may suffer

faults.

IMPORTANT!

If the supply mains and circuits are overloaded, other

consumers may suffer interference during the welding

work. If you have any doubts, contact your electricity

supply company.

SOURCES OF DANGER DURING ARC

WELDING

Arc welding results in a number of sources of danger. It

is therefore particularly important for the welder to com-

ply with the following rules so as not to place himself

or others in danger and to avoid endangering people

and equipment.

1. Have all work on the mains voltage system, for ex-

ample on cables, plugs, sockets, etc., performed

only by trained electricians. This particularly applies

to conﬁ guring intermediate cables.

2. If an accident occurs, disconnect the welding power

source from the mains immediately.

3. If electric touch voltages occur, switch off the weld-

ing set immediately and have it checked by an ex-

pert.

4. Always check for good electrical contacts on the

welding current side.

5. Wear insulating gloves on both hands for welding.

These offer protection from electric shocks (idling

voltage in the welding circuit), harmful radiation

(Heat and UV radiation) and from glowing metal

and slag spatter.

6. Wear ﬁ rm, insulated footwear. Your shoes should

also protect you in wet conditions. Open- toed foot-

wear is not suitable since falling droplets of glowing

metal will cause burns.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Defort DWI200S Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info