Bedienungsanleitung Dell B1163w (Seite 188 von 204) (Englisch)

536453

188

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

Operating system problems

188

5. Troubleshooting

I cannot scan via Gimp Front-

end.

Check if Gimp Front-end has Xsane:Device dialog. on the Acquire menu. If not, you should install Xsane plug-in for Gimp on the your

computer. You can find Xsane plug-in package for Gimp on Linux distribution CD or Gimp home page. For the detailed information,

refer to the Help for Linux distribution CD or Gimp Front-end application.

If you wish to use another kind of scan application, refer to application’s Help.

“Cannot open port device file”

error message appears when

printing a document.

Avoid changing print job parameters (e.q., via LPR GUI) while a print job is in progress. Known versions of CUPS server break the print

job whenever print options are changed and then try to restart the job from the beginning. Since Unified Linux Driver locks the port

while printing, the abrupt termination of the driver keeps the port locked and unavailable for subsequent print jobs. If this situation

occurs, try to release the port by selecting Release port in the Port configuration window.

The machine does not appear

on the scanners list.

• Ensure your machine is attached to your computer, connected properly via the USB port, and is turned on.

• Ensure the scanner driver for your machine is installed in your system. Open Unified Linux Driver configurator, switch to Scanners

configuration, then press Drivers. Make sure that driver with a name corresponding to your machine's name is listed in the window.

• Ensure the port is not busy. Since functional components of machine (printer and scanner) share the same I/O interface (port), the

situation of simultaneous access of different user applications to the same port is possible. To avoid possible conflicts, only one of

them at a time is allowed to gain control over the device. The other user will encounter “device busy” response. This usually happens

when starting a scan procedure. An appropriate message box appears.

To identify the source of the problem, open the Ports configuration and select the port assigned to your scanner, port's symbol /dev/

mfp0 corresponds to LP:0 designation displayed in the scanners’ options, /dev/mfp1 relates to LP:1, and so on. USB ports start at /

dev/mfp4, so scanner on USB:0 relates to /dev/mfp4 respectively and so forth sequentially. In the Selected port pane, you can see if

the port is occupied by another application. If this is the case, you should either wait for completion of the current job or press the

Release port button, if you are sure that the present port application is not functioning properly.

The machine does not scan. • Ensure a document is loaded into the machine, ensure your machine is connected to the computer.

• If there is an I/O error while scanning.

Condition Suggested solutions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dell B1163w Seite 188

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dell B1163w

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info