536464
117
Zoom out
Zoom in
Vorherige Seite
1/240
Nächste Seite
Understanding the Tool Box Menus 115
Job Time-Out 0: Off Disables the job time-out.
Available Range:
5–300 seconds
Specifies the amount of time that the printer waits for data to arrive from
the computer. The print job is cancelled if it times out.
Auto Log Print Off Does not automatically print a job history report.
On Automatically prints a job history report after every 10 jobs.
mm/inch millimeter (mm) Specifies the measurement unit displayed after the numeric value on the
operator panel.
inch (")
Panel Language English Specifies the language to be used on the operator panel.
French
German
Italian
Spanish
Danish
Dutch
Norwegian
Swedish
Default Print Paper Size A4 Specifies the default paper size.
Letter
Low Toner Alert
Message
On Shows the alert message when the toner is low.
Off Does not show the alert message.
Disable printing with
larger paper size
*3
Off Prints even if the paper set in the tray of the printer is larger than the
paper size set in the printer driver (the paper size does not have to match).
On Disables printing if the paper size set in the printer driver differs from the
paper set in the tray of the printer (the paper set in the tray is larger).
Apply New Settings After you complete the settings, click Apply New Settings to apply the changes.
*
1
Enter 5 in Sleep to put the printer in the Sleep mode five minutes after it finishes a job. This uses less energy, but requires more warm-
up time for the printer. Enter 5 if your printer shares an electrical circuit with room lighting and you notice lights flickering.
Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate with minimum
warm-up time. Select a value between 5 and 30 minutes for the Sleep mode if you want a balance between energy consumption and a
shorter warm-up period.
The printer automatically returns to the standby mode from the Sleep mode when it receives data from the computer. You can also
return the printer to the standby mode by pressing any button on the operator panel.
*
2
Auto-Off Timer feature is available only in certain regions.
*
3
Disable printing with larger paper size is available only in the Dell Printer Configuration Web Tool and the Tool Box.
117

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Dell C1760nw wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info