536464
133
Zoom out
Zoom in
Vorherige Seite
1/240
Nächste Seite
Understanding the Printer Menus 131
USB Settings
Use the USB Settings menu to change printer settings affecting a USB port.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
USB Port
Purpose:
To change the USB settings on your printer. The change takes effect after the printer is turned off and then on.
Va lue s :
System Settings
Use the System Settings menu to configure a variety of printer features.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
PowerSaver Time
Purpose:
To specify the time for transition to power saver mode.
Va lue s :
Enter 5 in Sleep to put the printer in the Sleep mode five minutes after it finishes a job. This uses less energy, but
requires more warm-up time for the printer. Enter 5 if your printer shares an electrical circuit with room lighting and
you notice lights flickering.
Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate
with minimum warm-up time. Select a value between 5 and 30 minutes for the Sleep mode if you want a balance
between energy consumption and a shorter warm-up period.
The printer automatically returns to the standby mode from the Sleep mode when it receives data from the
computer. You can also return the printer to the standby mode by pressing any button on the operator panel.
If the Auto-Off Timer feature turns off the printer, the printer cannot be turned back on automatically. To turn the
printer back on, physically turn the power switch of the printer to On.
Enable* Enables the USB interface.
Disable Disables the USB interface.
Sleep 5min.* Specifies the time taken by the printer before it enters Sleep mode
after it finishes a job.
Available Range:
5-30min.
Deep Sleep 6min.* Specifies the time taken by the printer before it enters Deep Sleep
mode after it goes into Sleep mode.
Available Range:
1–6min.
Auto-Off Timer
*1
Off Disables the Auto-Off Timer.
On
*
180min.
*
Specifies the time it takes to automatically turn off the printer after it
has entered Deep Sleep mode.
Available Range:
60–1440min.
*1
Auto-Off Timer feature is available only in certain regions.
133

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Dell C1760nw wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info