Bedienungsanleitung Dell C1760nw (Seite 148 von 240) (Englisch)

536464

148

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

146 Print Media Guidelines

Selecting Pre-Punched Paper

Pre-punched paper brands can differ in the number and placement of holes and in manufacturing techniques.

However, it may not be possible to print on the paper to depending on the placement of holes on the paper.

To select and use pre-punched paper:

• Test paper from several manufacturers before ordering and using large quantities of pre-punched paper.

• Paper should be punched at the paper manufacturer and not drilled into paper already packaged in a ream. Drilled

paper can cause jams when multiple sheets feed through the printer. This may result in a paper jam.

• Pre-punched paper can include more paper dust than standard paper. Your printer may require more frequent

cleaning and feed reliability may not be as good as standard paper.

• Weight guidelines for pre-punched paper are the same as non-punched paper.

Envelopes

Depending on the choice of envelopes, it is possible to expect variable levels of light wrinkling. Before buying large

quantities of any print media, it is recommended that you try a sample first. See "Loading Print Media in the

Multipurpose Feeder (MPF)" on page 151 or "Loading Print Media in the Priority Sheet Inserter (PSI) (Dell

C1760nw Color Printer only)" on page 159 for instructions on loading an envelope.

When printing on envelopes:

• Use only high-quality envelopes that are designed for use in laser printers.

• Set the print media source to MPF or PSI. Set the paper type to

Envelope

, and select the correct size of envelope

from the printer driver.

• For best performance, use envelopes made from 75 g/m

(20 lb bond) paper. You can use up to 105 g/m

(28 lb

bond) weight for the envelope feeder as long as the cotton content is 25% or less. Envelopes with 100% cotton

content must not exceed 90 g/m

(24 lb bond) weight.

• Use only freshly unpackaged, undamaged envelopes.

• Use envelopes that can withstand temperatures of 205°C (401°F) without sealing, excessive curling, wrinkling, or

releasing hazardous emissions. If you have any doubts about the envelopes you are considering, check with the

envelope supplier.

• Adjust the guide to fit the width of the envelopes.

• To load envelope in MPF or PSI, the print side must be facing up.

• See "Loading Envelopes in the Multipurpose Feeder (MPF)" on page 156 or "Loading an Envelope in the Priority

Sheet Inserter (PSI)" on page 161 for instructions on loading an envelope.

• Use one envelope size during a print job.

• Ensure that the humidity is low because high humidity (more than 60%) and the high printing temperatures may

seal the envelopes.

• For best performance, do not use envelopes that:

– Have excessive curl or twist

– Are stuck together or damaged in any way

– Contain windows, holes, perforations, cutouts, embossing

– Use metal clasps, string ties, or metal folding bars

– Have an interlocking design

– Have postage stamps attached

– Have nicked edges or bent corners

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dell C1760nw Seite 148

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info