55305
84
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
84 Appendix
System Setup Options
NOTE: Depending on your computer and installed devices, the items listed in this section may not appear, or may
not appear exactly as listed.
System
System Time Identifies the system clock time as formatted.
System Date Identifies the date as formatted: Weekday Month
Drive Configuration
Diskette Drive Identifies and defines the floppy drive attached to the FLOPPY connector
on the system board as Off, USB, Internal, or Read Only.
Primary Master
Drive
Identifies the drive attached to the PRI IDE connectors on the system
board, and lists the capacity for a hard drive.
Primary Slave
Drive
Identifies and defines the slave drive to the primary master drive on PRI
IDE. Can be turned Off or set to Auto (to detect the drive) and if present,
lists the capacity for the drive.
Secondary Master
Drive
Identifies the drive attached to the SEC IDE connectors on the system
board, and lists the capacity for a hard drive (lists n/a for optical devices
such as CD/DVD drives).
Secondary Slave
Drive
Identifies and defines the slave drive to the secondary master drive on SEC
IDE. Can be turned Off or set to Auto (to detect the drive) and if present,
lists the capacity for the drives (lists n/a for optical devices such as CD/DVD
drives).
IDE Drive UDMA Identifies whether or not to enable UDMA (the Ultra Direct Memory
Access mass storage interface).
Hard-Disk Drive Sequence
Identifies the device types that are in first and second priority for booting
the system.
System BIOS - devices such as hard drives and CD/DVD ROMs as listed in
the Boot Sequence section of this System Setup program
USB device - a device such as an external hard drive or USB memory key
By default, System BIOS boot devices is first (in position 1), followed by
USB device. To change the order, select an option and press the + or - key
to move the selection up or down in priority.
NOTE: If you insert a boot device and restart the computer, this option appears
in the system setup menu. To boot from a USB memory device, select the USB
device and move it so it becomes the first device in the list.
84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Dell Dimension B110 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info