681817
166
Zoom out
Zoom in
Vorherige Seite
1/399
Nächste Seite
166
| Dell™ Printer Configuration Web Tool
*1
The default value can be changed by using Dell Printer Configuration Web Tool.
SNMP Configuration Enable SNMP v1/v2c
Protocol
Select the check box to enable the SNMP v1/v2c
protocol.
Edit SNMP v1/v2c
Properties
Click to display the SNMP v1/v2c page and to edit the
setting of SNMP v1/v2c protocol from the page.
Enable SNMP v3
Protocol
Select the check box to enable the SNMP v3 protocol.
Edit SNMP v3
Properties
Click to display the SNMP v3 page and to edit the setting
of SNMP v3 protocol from the page.
You can click this item only when SSL/TSL
communication is enabled.
Community Name Community Name
(Read only)
*1
Sets the community name to access (read only) data
using up to 31 alphanumeric characters.
The original setting remains valid if no input is made.
Characters entered for community name in the previous
settings are not displayed on the screen. The default Read
Community is public.
Re-enter Community
Name (Read only)
*1
Enter the community name to access (read only) data
again to check it.
Community Name
(Read/Write)
*1
Sets the community name to access (read and write) data
using up to 31 alphanumeric characters.
The original setting remains valid if no input is made.
Characters entered for community name in the previous
settings are not displayed on the screen. The default
Read/Write Community is private.
Re-enter Community
Name (Read/Write)
*1
Enter the community name to access (read and write)
data again to check it.
Community Name
(Trap)
*1
Sets the community name used for trap up to 31
alphanumeric characters.
The original setting remains valid if no input is made.
Characters entered for Community Name (Trap) in the
previous settings are not displayed on the screen. The
default Trap Community is " " (NULL).
Re-enter Community
Name (Trap)
*1
Enter the community name used for trap again to check
it.
Trap Notification 1-4 Trap Address Type Select the check boxes to notify trap occurrence. In this
case, specify the IP address and IP socket in the following
format:
Trap Address IPv4
Specify the IP address and IP socket in the
nnn.nnn.nnn.nnn:mmmmm format. Each section of nnn
is a variable value between 0 and 255. Note that values
127 and 224-254 are not valid for the first three-digits
only. IP socket mmmmm is a variable value between 0
and 65,535.
IPv6
Specify the IP address and IP socket in the
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmmmm format.
Each section of XXXX is a hexadecimal variable value
between 0 and ffff. IP socket mmmmm is a variable value
between 0 and 65,535.
Port Number
Notify
Network
*2
Authenticate Error
Trap
Select the check box to notify Authenticate Error Trap.
166

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Dell H625cdw wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Dell H625cdw

Dell H625cdw Installationsanweisung - Deutsch - 40 seiten

Dell H625cdw Bedienungsanleitung - Deutsch - 433 seiten

Dell H625cdw Installationsanweisung - Englisch, Holländisch - 40 seiten

Dell H625cdw Bedienungsanleitung - Holländisch - 421 seiten

Dell H625cdw Installationsanweisung - Dänisch - 40 seiten

Dell H625cdw Installationsanweisung - Französisch, Italienisch, Spanisch - 40 seiten

Dell H625cdw Installationsanweisung - Schwedisch, Norwegisch - 40 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info