681817
260
Zoom out
Zoom in
Vorherige Seite
1/399
Nächste Seite
260
|Faxing
Using Remote Receive
Use Remote Receive to manually receive a fax from an external telephone without
having to go to the printer.
To manually receive a fax using the external telephone, you must connect an external
telephone to the phone connector on the rear of the printer and also set Remote
Receive to On. See "Connecting a Telephone or Answering Machine."
When you receive a call on the external telephone and hear a fax tone, enter the remote
receive code from the external telephone.
NOTE:
When entering the remote receive code from the external telephone, press the number keys slowly
in sequence. If you still hear the fax tone from the remote machine, try entering the two-digit code
again.
The default remote receive code is 00. You can change the two-digit code to a number of your
choice. See "Receive Mode."
Set the dialing system of your external telephone to DTMF.
Using Manual Receive in On Hook
You can manually receive a fax by tapping Receive in On Hook on the touch panel.
1 When the external telephone rings, pick up the handset.
2 Make sure that you hear the fax tone, and then press the (Home) button.
3 Tap Fax On Hook Receive Receive.
4 Hang up the hand set of the external telephone.
The printer begins receiving a fax and returns to the standby mode when the reception is
completed.
Receiving Faxes Using the Distinctive Ring Pattern Detection
(DRPD)
The DRPD is a telephone company service which enables a user to use a single telephone
line to answer several different telephone numbers. The particular number someone
uses to call you on is identified by different ringing patterns, which consist of various
combinations of long and short ringing sounds.
Before using the Distinctive Ring Pattern Detection option, Distinctive Ring service must
be installed on your telephone line by the telephone company. To set up Distinctive Ring
Pattern Detection, you need another telephone line at your location, or someone
available to dial your fax number from outside.
To set up the DRPD:
NOTE:
You can set the same setting using the Tool Box or Dell Printer Configuration Web Tool. See "Tool
Box" or "Dell™ Printer Configuration Web Tool."
1 Press the (Information) button.
2 Tap the Tools tab Admin Settings Fax Settings Fax Line
Settings.
If Panel Lock Control is set to Enable, enter the password. See "Panel Lock."
3 Tap until DRPD Pattern appears, and then tap DRPD Pattern.
260

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Dell H625cdw wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Dell H625cdw

Dell H625cdw Installationsanweisung - Deutsch - 40 seiten

Dell H625cdw Bedienungsanleitung - Deutsch - 433 seiten

Dell H625cdw Installationsanweisung - Englisch, Holländisch - 40 seiten

Dell H625cdw Bedienungsanleitung - Holländisch - 421 seiten

Dell H625cdw Installationsanweisung - Dänisch - 40 seiten

Dell H625cdw Installationsanweisung - Französisch, Italienisch, Spanisch - 40 seiten

Dell H625cdw Installationsanweisung - Schwedisch, Norwegisch - 40 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info