Dehumidifier
5
How to dehumidify
How to dehumidify
1) Plug the appliance into a mains socket.
2) Check that the “tank full/tank missing” light is off, if not
place the tank in the correct position or empty it if it’s necessary.
3) To easily select the right humidity level, we suggest you operate
as follows:
Use the function selector to choose (for maximum dehumidi-
fying power) or (for minimum dehumidifying power).
Turn the humidistat clockwise as far as it will go to the MAX position.
(The dehumidification standby light comes on for the first 3
minutes after which the appliance starts dehumidifying).
Leave the unit on this setting until signs of excess moisture (e.g.
condensation on windows) decrease.
At this point select or and slowly turn the humidistat
knob anti-clockwise until the dehumidification light switches off.
The dehumidifier will then keep the humidity at the selected level
automatically.
How to heat
1) Plug the appliance into a mains socket.
2) It is possible to adjust the room temperature by turning the
thermostat knob on one of the available position (MIN-MED-
MAX). If you wish to heat the room, set the thermostat to the
temperature level desired.
3) Select the economy ( = 1250 W) or maximum ( = 2000
W) heating level on the function selector.
To easily select the right temperature level, we suggest you to
operate as follows:
Tu rn the thermostat to position MAX
When the temperature in the room has reached the required
level, slowly turn the thermostat knob anticlockwise until the heat-
ing light goes out.
The thermostat will then keep the temperature in the room at the
Dehumidifying
standby light
Humidistat
knob
Function
selector
Tank full/
tank missing
fig. 4
