Bedienungsanleitung DeLonghi Dinamica ECAM 350.35 (Seite 16 von 24) (Englisch)

687415

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

the milk a creamy frothy appearance and making it more

voluminous;

9. For a creamier froth, rotate the container with slow move-

ments in an upward direction;

10. When the required temperature is obtained, interrupt

steam delivery by pressing the selection arrow correspond-

ing to "STOP".

Danger of burns!

Stop steam delivery before removing the container with the

frothed milk to avoid burns caused by splashes of boiling milk.

11. Add the milk froth to the coee prepared previously. The

cappuccino is ready. Sweeten to taste and, if desired, sprin-

kle the froth with a little cocoa powder.

Please note!

If “Energy saving” is active, you may have to wait a few seconds

before steam is delivered.

10.1 Making hot milk (not frothed)

To make hot milk without froth, proceed as described in the

above section, but with the cappuccino maker selection ring

(A21) positioned upwards in the "HOT MILK" position.

10.2 Cleaning the cappuccino maker after use

Clean the cappuccino maker (A20) each time you use it to avoid

the build-up of milk residues or blockages.

Danger of burns!

When cleaning the cappuccino maker, a little hot water is deliv-

ered. Avoid contact with splashes of water.

1. Deliver a little water by pressing the icon (B6 - g.13).

To interrupt, press the selection arrow (B4) corresponding

to "STOP".

Wait a few minutes for the cappuccino maker to cool down.

Turn the cappuccino maker downwards to remove it (g.

14).

3. Move the selection ring (A21) upwards

(g. 15)

4. Remove the connection nozzle downwards

(A22 - g. 16)

5. Make sure the two holes shown by the arrow in

g. 17

are

not blocked. If necessary, clean with a pin.

Replace the connection nozzle, move the selection ring

downwards and put the cappuccino maker back on the

nozzle

(g. 18)

turning it clockwise and pushing it upwards

until it is attached.

11. “ ” PROGRAMMING AND SELECTING

In you can select beverages customised to your per-

sonal tastes. If the beverages have not yet been programmed,

the appliance will request the customisation procedure before

proceeding with delivery:

1. Press (B13);

2. Press the selection arrows (B2 and B4) until the required

beverage is displayed between the two dotted lines;

Unprogrammed beverages:

3. Press OK (B3) to select;

4. "Program aroma" appears on the display. Press the selec-

tion arrows (B2 and B4) or (B7) until the required

aroma is selected. Press OK. "Program coee" appears on

the display together with a bar which gradually lls as de-

livery progresses. When the required quantity is reached,

press OK.

5. The appliance then makes the coee. Press OK to interrupt

delivery when the required quantity of coee is reached.

6. "Save parameters?": to save the settings, press OK (other-

wise press ESC - B2 or B5).

8. "Parameters saved" (or "Parameters not saved"). The ap-

pliance is ready for use again.

Programmed beverages:

3. Press OK (B3) to select;

4. Preparation begins according to the previously pro-

grammed settings.

Please note:

Two cups of a beverage can only be selected when the corre-

sponding single beverages have been programmed.

12. DELIVERING HOT WATER

Important! Danger of burns.

Never leave the machine unattended while delivering hot water.

The cappuccino maker (A20) becomes hot while water is being

delivered and must be held by the black ring (A21) only.

1. Place a container under the cappuccino maker (A20) (as

close as possible to avoid splashes).

2. Press (B6 - g. 13). "HOT WATER” appears on the dis-

play (B1), together with a progress bar which lls gradual-

ly as preparation proceeds.

4. The machine delivers about 250 ml of hot water, then de-

livery stops automatically. To interrupt hot water delivery

manually, press the selection arrow (B4) corresponding to

"STOP" again.

Please note!

If “Energy Saving” is active, you may have to wait a few seconds

before hot water and steam are delivered.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi Dinamica ECAM 350.35 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi Dinamica ECAM 350.35

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info