Bedienungsanleitung DeLonghi DRAGON 4 - TRD4 1025T (Seite 7 von 9) (Englisch)

709089

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

- Turn the power selector to position MED to select

medium output (the min/med light will be on).

- Turn the power selector to position MAX to select

maximum output (the lights will be on).

Adjusting the thermostat

When the room has reached the desired temperature, turn

the thermostat knob slowly in an anti-clockwise direction

until you hear a "click" and not beyond it. The thermostat

will then adjust the set temperature automatically and

keep it constant. If your unit is a three-output version, in

intermediate seasons or on days when temperatures are not

particularly cold, select minimum output to optimize savings

and consumption.

Antifreeze function

Turn the thermostat dial to the position and the power

selector to position MAX. The appliance will maintain a

minimum room temperature of approximately 5°C, thus

preventing freezing while conserving energy. In models that

come with a timer, tabs must be set in the inward position.

Reminder

To completely shut the appliance o, turn the power selector to

the "0" position and then unplug the appliance from the outlet.

UNITS WITH TIMER

How to use the timer

To program heating, proceed as follows:

- Look at the time on your clock or watch. If it is 10 p.m.,

turn the numbered timer disk clockwise until the

number 22 (10 p.m.) on the disk coincides with the

pointer s (3) on the timer. Set the periods of time

when you want the appliance to work by pushing the

teeth (1) inward.

Each tooth (1) corresponds to a period of 15 minutes.

This will leave visible sectors which correspond to

the periods of operation (2). When set, the radiator

will operate automatically each day during the times

programmed (important: the radiator must always be

plugged into the socket).

- To change the programming, move the teeth back

into the initial position and set the new periods of

operation.

- To turn the appliance o completely, as well as turning

the knob to the o position, you must also unplug it

from the power outlet to avoid continued operation of

the timer.

IMPORTANT: DO NOT ROTATE CLOCK DIAL COUNTER-

CLOCKWISE.

The timer is like an electric clock, and will only work when

plugged into a power supply. When unplugged, the timer

stops and must be later re-set.

Timer override

If you wish to override the timer settings, push the timer

switch to position I (g.2) manual (timer override). To return

to timed operation push the switch back to the middle

position (g.2).

NOTE: if the timer switch is at the 0 position (g. 2),

the heater is o and will not operate).

Heater o

Timer operation

Manual (timer override)

Safety device

A safety device shuts the radiator down in the case of

overheating. To start the radiator up again, contact Customer

Experience. See enclosed guarantee leaet.

Units with timer

Fig. 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi DRAGON 4 - TRD4 1025T Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info