15
After cleaning is complete, remove the milk container and place in the refrigerator. You should not leave
the milk outside the refrigerator for more than 15 minutes.
NOTE 4: To change the quantity of coffee or milk delivered automatically into the cup, follow the instructions
in section 14.
13 PREPARING STEAMED OR FROTHED MILK (WITHOUT COFFEE)
• Remove the lid of the milk container.
• Fill the container with the quantity of milk you want to prepare (fig. 19).
• Put the lid on the milk container. Ensure the milk
intake tube is attached.
• Attach the milk container to the appliance (fig. 22)
• Place a sufficiently large cup under the milk spout
(fig. 23).
• If you want to prepare frothed milk using whole
milk, put the froth regulator on CAPPUCCINO (fig.
25C) stamped on the milk container lid. If you
want to prepare frothed milk using using non-fat-
milk, put the froth regulator on CAPPUCCINO
NON FAT (fig. 25B).
• If, on the other hand, you want to prepare hot milk,
put the froth regulator on CAFFELATTE (fig. 25A).
•Press button twice (within 2 seconds). The
appliance displays:
frothing or steaming
and after a few seconds, the milk is delivered from the milk spout into the cup below. (Delivery stops auto-
matically).
•After delivery is complete, clean the channels inside the milk container lid by pressing the CLEAN button
as described in the previous section (note 3).
14 CHANGING THE QUANTITY OF COFFEE AND MILK FOR LATTES OR CAPPUCCINOS
The appliance is factory preset to automatically deliver a standard cappuccino. To change these quantities,
proceed as follows:
• Fill the container with milk up to the maximum level indicated on the container.
•Press the button for at least 8 seconds then release the button.
• The appliance displays:
MILK FOR CAPPUCCINO PROGRAM QUANTITY
and starts to run off milk.
•Once the required quantity of milk has been run off, press the button again. Milk delivery stops and
the quantity is memorized. You should not run frothed milk for more than 3 minutes at a time.
•After a few seconds, the appliance delivers coffee into the cup and displays:
COFFEE FOR CAPPUCCINO PROGRAM QUANTITY
•Once the required quantity of coffee has been delivered, press the button again. Coffee delivery
stops and the quantity is memorized.
The appliance is now re-programmed with the new settings and displays: READY.
