Bedienungsanleitung DeLonghi ECAM 22.360.B - MAGNIFICA S (Seite 18 von 22) (Englisch)

562588

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Level 1

Level 2

Level 3

Level 4

The machine can also be programmed according to the hardness

of the mains water in the various regions so that the machine

needs to be descaled less often.

Measuring water hardness

 

its pack (attached to the English instructions).

2. Immerse the paper completely in a glass of water for one

second.

3. Remove the paper from the water and shake lightly. After

about a minute, 1, 2, 3, or 4 red squares form, depending

on the hardness of the water. Each square corresponds to

one level.

Setting water hardness

1. Press the MENU button to access the menu.

2. Press the or button until “Water hardness” is

displayed.

3. Conrm the selection by pressing the button.

4. Press the or button repeatedly to set the level as

measured by the indicator paper (see previous section).

5. Press the button to conrm the setting.

The machine is now reprogrammed with the new water hard-



WATER SOFTENER FILTER

Certain models are tted with a water softener lter. If this is not

the case with your model, you are recommended to purchase

one from De’Longhi Customer Services.

To use the lter correctly, follow the instructions below.

Installing the lter

1. Remove the lter from the packaging.

2. Turn the date indicator disk (see g. 28) until the next two

months of use are displayed.

Please note :

The lter lasts about two months if the appliance is used nor-

mally. If the coee machine is left unused with the lter instal-

led, it will last a maximum of three weeks.

3. To activate the lter, run tap water through the hole in the

lter as shown in the gure until water comes out of the

openings at the side for more than a minute (g. 30).

4. Extract the tank from the appliance and ll with water.

5. Insert the lter in the water tank and immerse it com-

pletely for about ten seconds, sloping it to enable the air

bubbles to escape (g. 31).

6. Insert the lter in the lter housing (g. 32A) and press as

far as it will go.

 

in the machine.

When you install the lter you must notify the appliance of its

presence.

8. Press the MENU button to enter the menu;

9. Press the or button repeatedly until “Install l-

ter” is displayed.

10. Press the button.

 

12. Press the       



13. Position a container with a minimum capacity of 100 ml

under the spout.

14. Press the button to conrm the selection. The ap-

pliance begins hot water delivery and the message “Please

wait” is displayed.

15. After delivery, the appliance returns automatically to the

“Ready for coee” position.

The new lter is active and indicated by an asterisk displayed

under “Install lter” in the menu. You can now use the appliance.

Replacing the lter

When “REPLACE FILTER” is displayed, after two months (see date

indicator) or when the appliance has not been used for 3 weeks,

you should replace the lter:

1. Extract the tank and exhausted lter;

2. Take the new lter out of its packet and proceed as illustra-

ted in points 3, 4, 5 and 6 in the previous section.

3. Position a container with a minimum capacity of 100 ml

under the spout.

4. Press the MENU button to enter the menu;

5. Press the or button repeatedly until “Replace l-

ter” is displayed.

6. Press the button;

 

8. Press the button to conrm the selection;

 

10. Press the button to conrm the selection. The ap-

pliance begins hot water delivery and the message “Please

wait” is displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ECAM 22.360.B - MAGNIFICA S Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi ECAM 22.360.B - MAGNIFICA S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info