Bedienungsanleitung DeLonghi ecam 23 210 b w intensa (Seite 12 von 16) (Holländisch)

362691

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

9� Press the button to conﬁrm introduc-

tion of the solution� The light ﬂashes

telling you to turn the steam knob�

10� Turn the steam knob to the I position

The descaling programme starts and the

descaler liquid comes out of the cappuccino

maker�

The descale programme automatically per-

forms a series of rinses and pauses to remo-

ve limescale deposits from inside the machi-

ne�

After about 30 minutes, the water tank is empty�

The OK and lights come on and the

light ﬂashes�

11� Empty the container used to collect the de-

scaler solution and replace it under the cap-

puccino maker�

12� Remove the water tank, empty, rinse under

running water, ﬁll with clean water and repla-

ce� The light goes off�

13� Hot water comes out of the cappuccino ma-

ker�

14� When the water tank is completely empty,

is displayed�

15� Turn the knob to the 0 position, insert the

ﬁlter (if present), ﬁll the water tank and the

appliance is ready for use�

SETTING WATER HARDNESS

The light is displayed after a period of time

established according to the water hardness set�

The machine is factory set for a hardness value

of 4� The machine can also be programmed ac-

cording to the hardness of the mains water in the

various regions so that the machine needs to be

descaled less often�

Measuring water hardness

1� Remove the “TOTAL HARDNESS TEST” indi-

cator paper attached to this manual from its

pack�

2� Immerse the paper completely in a glass of

water for one second�

3� Remove the paper from the water and shake

lightly�

After about a minute, 1, 2, 3, or 4 red squares

form, depending on the hardness of the wa-

ter� Each square corresponds to one level�

Level 1

Level 2

Level 3

Level 4

Set water hardness

1� Press the P button to enter the menu�

2� Turn the selector knob until the light is

selected�

3� Conﬁrm the selection by pressing the

button�

4� Turn the selection knob and set the level

shown by the indicator paper (see previous

paragraph)�

LEVEL 1

LEVEL 2

LEVEL 3

LEVEL 4

5� Press the button to conﬁrm the setting�

6� Press the button to exit the menu�

The machine is now reprogrammed with the new

water hardness setting�

WATER SOFTENER FILTER

Certain models are ﬁtted with a water softener

ﬁlter� If this is not the case with your model, you

are recommended to purchase one from De’Lon-

ghi Customer Services�

To use the ﬁlter correctly, follow the instructions

below�

Installing the ﬁlter

1� Remove the ﬁlter from the packaging�

2� Turn the date indicator disk (see ﬁg� 30) until

the next 2 months of use are displayed�

Please note:

The ﬁlter lasts about two months if the appliance

is used normally� If the coffee maker is left unu-

sed with the ﬁlter installed, it will last a maximum

of three weeks�

3� Remove the tank from the appliance and ﬁll

with water�

4� Insert the ﬁlter in the water tank and immer-

se it completely, sloping it to enable the air

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi ecam 23 210 b w intensa Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info